Thanks![frame]
Is this rubber 'bit' available?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
Arthurdaily
- Minor Addict
- Posts: 636
- Joined: Tue May 24, 2011 4:25 pm
- MMOC Member: No
Is this rubber 'bit' available?
I am sorting out my doors on my restoration - but am wondering about the bottom area of the rear window frame strut... I have seen many cars with a sort of small rubber seal that sits between the strut and the car door - but I haven't got any on my car - are they an actual 'part' or do people just make 'em?
Thanks![frame]
[/frame]
Thanks![frame]
-
chickenjohn
- Minor Legend
- Posts: 4064
- Joined: Tue Dec 07, 2004 8:50 am
- Location: Margate, East Kent
- MMOC Member: No
Re: Is this rubber 'bit' available?
Yes, those seals should be present- and they are available check ESM? bull Motif or your favourite supplier.
Cheers John - all comments IMHO
- Come to this years Kent branches Hop rally! http://www.kenthop.co.uk
(check out the East Kent branch website http://www.ekmm.co.uk )


- Come to this years Kent branches Hop rally! http://www.kenthop.co.uk
(check out the East Kent branch website http://www.ekmm.co.uk )

-
Arthurdaily
- Minor Addict
- Posts: 636
- Joined: Tue May 24, 2011 4:25 pm
- MMOC Member: No
Re: Is this rubber 'bit' available?
Hi, thanks - can't find 'em listed with BM or ESM - Moss seems to have them on a schematic but no price, will have to ring. Thanks Chicken!
-
mike.perry
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Is this rubber 'bit' available?
I squirted some silicone sealant in the gap to stop the draft
[sig]3580[/sig]
-
irmscher
- Minor Legend
- Posts: 3773
- Joined: Wed Jul 14, 2010 10:53 am
- Location: South Manchester
- MMOC Member: Yes
Re: Is this rubber 'bit' available?
I thought you were restoring a blue car
-
chickenjohn
- Minor Legend
- Posts: 4064
- Joined: Tue Dec 07, 2004 8:50 am
- Location: Margate, East Kent
- MMOC Member: No
Re: Is this rubber 'bit' available?
Here it is on ESM (if it is the seal I think you mean), only £1.50 plus VAT and postage.
http://morrisminorspares.co.uk/shop/pro ... 11e2ee002d

http://morrisminorspares.co.uk/shop/pro ... 11e2ee002d

Cheers John - all comments IMHO
- Come to this years Kent branches Hop rally! http://www.kenthop.co.uk
(check out the East Kent branch website http://www.ekmm.co.uk )


- Come to this years Kent branches Hop rally! http://www.kenthop.co.uk
(check out the East Kent branch website http://www.ekmm.co.uk )

Re: Is this rubber 'bit' available?
No, that one is for the quarter light. There is a short section of edge seal that should be (was originally from the factory) fitted in that gap, but I can't see it on any of the usual suppliers websites.chickenjohn wrote:Here it is on ESM (if it is the seal I think you mean), only £1.50 plus VAT and postage.
http://morrisminorspares.co.uk/shop/pro ... 11e2ee002d
1956 Morris Minor Series II
1959 MGA 1600 Roadster
1966 Jaguar Mk2 3.8 MOD
1959 MGA 1600 Roadster
1966 Jaguar Mk2 3.8 MOD
-
Arthurdaily
- Minor Addict
- Posts: 636
- Joined: Tue May 24, 2011 4:25 pm
- MMOC Member: No
Re: Is this rubber 'bit' available?
Yes, it is the smaller one I'm after... I'll have to make some me thinks!
It was a blue car Irmscher... now red... mostly...
It was a blue car Irmscher... now red... mostly...
-
Declan_Burns
- Minor Legend
- Posts: 1962
- Joined: Wed Apr 18, 2007 7:32 am
- Location: Düsseldorf, Germany
- MMOC Member: No
Re: Is this rubber 'bit' available?
I think this is the seal in question and I don't think they are available as I asked the same question a few years back. They should be easy to make from 1mm rubber or an offcut from the seal from the door to the sill which has a similar profile and could be cut back. I'll have a look at doing it over the weekend. I repaired the one in the photo with silicon sealer at the time.
Regards
Declan[frame]
[/frame]
Regards
Declan[frame]
Regards
Declan
-
chickenjohn
- Minor Legend
- Posts: 4064
- Joined: Tue Dec 07, 2004 8:50 am
- Location: Margate, East Kent
- MMOC Member: No
Re: Is this rubber 'bit' available?
Interesting, I don't think I've ever seen (or perhaps just not noticed) a Minor with a seal in that part of the door before, perhaps an owner modification to keep water out of the door (and thus keep rust at bay!)
If so, a good idea, if it works.
If so, a good idea, if it works.
-
aupickup
- Minor Maniac
- Posts: 6004
- Joined: Tue Jul 20, 2004 11:41 pm
- Location: lanark
- MMOC Member: No
Re: Is this rubber 'bit' available?
i have them on my 2 door