oil filter
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
oil filter
hi, i bought a oil filter conversion bolt. well 2 bolts one screws on to the other, one bolt screws on to the oil filter and the other screws in to the old filter housing , what oil filter will i need that will fit the old housing and give a good seal, cheers
-
- Minor Fan
- Posts: 313
- Joined: Thu Dec 13, 2007 3:06 am
- Location: Michigan, USA
- MMOC Member: No
Re: oil filter
I'm curious to see that! Could you post a photo? Thanks!
[img]http://i298.photobucket.com/albums/mm274/bazzalucas/Morris.jpg[/img]
-
- Minor Addict
- Posts: 761
- Joined: Wed Jul 22, 2009 10:08 am
- Location: West London
- MMOC Member: No
Re: oil filter
yes that sounds mad. although I have mastered the old design now. just remember to use the middle width o ring or it will never seal.
Re: oil filter
trying to post a picture hope this works[frame][/frame]
Re: oil filter
as you can see the picture is of 2 bolts the bottom nut moves up or down to adjust lenth, i need the circumference of the paper oil filter O ring to work out what filter will fit, i bought this off ebay from a private seller he said it would fit the A series engine cheers
-
- Minor Fan
- Posts: 313
- Joined: Thu Dec 13, 2007 3:06 am
- Location: Michigan, USA
- MMOC Member: No
Re: oil filter
Interesting. I take it that the big bolt is hollow, but how does it seal?
[img]http://i298.photobucket.com/albums/mm274/bazzalucas/Morris.jpg[/img]
Re: oil filter
hi bmcecosse do you think it will work okay jeff-d
Re: oil filter
The big bolt is hollow has 6 small holes around the top of it for the oil to flow into the filter, it should seal the same as other oil filters when you screw it up tight
-
- Minor Fan
- Posts: 313
- Joined: Thu Dec 13, 2007 3:06 am
- Location: Michigan, USA
- MMOC Member: No
Re: oil filter
I see that Moss sells an adaptor kit which includes a bolt like yours, but also a "sandwich plate" that goes between block and filter, as well as a bunch of o-rings. Did your seller include anything else?
[img]http://i298.photobucket.com/albums/mm274/bazzalucas/Morris.jpg[/img]
Re: oil filter
nothink else came with it, is moss on the internet so i can have a look at the set up cheers
-
- Minor Fan
- Posts: 313
- Joined: Thu Dec 13, 2007 3:06 am
- Location: Michigan, USA
- MMOC Member: No
Re: oil filter
Try this: mgaguru.com/mgtech/engine/of100b.htm. Moss Motors spin-on oil filter adapter kit 235-940.
[img]http://i298.photobucket.com/albums/mm274/bazzalucas/Morris.jpg[/img]
Re: oil filter
What you've bought is part of a conversion kit. There should be a thick adapter plate that seals against the existing housing, and is held on by one of those bolts. The other bolt provides the mounting point for the spin-on filter that is used for all the conversions. The complete kit does allow you to retain the existing filter head, if that's what you want to do. Those bolts on their own are just scrap metal. Sorry.
Re: oil filter
Yes - I have seen something similar with a sandwich plate - frankly I don't like the look of it (and you are missing the important part anyway) - the six small holes will surely limit the oil flow, especially when cold. Send it back for a refund - and buy the correct kit if you feel you must go 'screw-on'.
-
- Minor Fan
- Posts: 313
- Joined: Thu Dec 13, 2007 3:06 am
- Location: Michigan, USA
- MMOC Member: No
Re: oil filter
Looking at those Moss pictures, I now recall having an MGB with such an arrangement many decades ago. I don't recall anything else, which suggests a) it didn't give problems or 2) my memory is shot!
[img]http://i298.photobucket.com/albums/mm274/bazzalucas/Morris.jpg[/img]
Re: oil filter
thanks for all your help and advice, jeff-d
-
- Minor Addict
- Posts: 761
- Joined: Wed Jul 22, 2009 10:08 am
- Location: West London
- MMOC Member: No
Re: oil filter
so you can put a spin on filter without taking off the original block studs? me is confused.