1968 TRAVELLER RESTORATION
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
1968 TRAVELLER RESTORATION
My 1968 traveller which i am restoring with the help of my son and friend Michael
Last edited by alexandermclaren on Tue Nov 06, 2012 9:52 am, edited 6 times in total.
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
Re: 1968 TRAVELLER RESTORE RESTORATION
[frame][/frame][frame][/frame][frame][/frame][frame][/frame]
Last edited by alexandermclaren on Wed Jan 11, 2012 9:29 pm, edited 7 times in total.
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
Re: 1968 TRAVELLER RESTORE RESTORATION
this aint my welding its what i found
[frame][/frame]
[frame][/frame]
Last edited by alexandermclaren on Fri Jan 06, 2012 10:42 pm, edited 2 times in total.
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
Re: 1968 TRAVELLER RESTORE RESTORATION
LOOKING GOOD LIKE NEW
MAYBE LIKE THAT AS THE GREASE WAS SPUN OUT OF THE DRIVE SHAFT ALONG WITH A LEAKING HYDRAULIC LINES[frame][/frame]
MAYBE LIKE THAT AS THE GREASE WAS SPUN OUT OF THE DRIVE SHAFT ALONG WITH A LEAKING HYDRAULIC LINES[frame][/frame]
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
-
- Minor Friendly
- Posts: 99
- Joined: Thu Dec 23, 2010 10:39 am
- MMOC Member: No
Re: 1968 TRAVELLER RESTORE RESTORATION
Nice and shiny on the top but a wee bit scabby on the bottom eh. And that welding looks like it's been done by a 5 year old.
Best o' luck wi'it anyroad.
Best o' luck wi'it anyroad.
-
- Minor Maniac
- Posts: 7845
- Joined: Thu Jan 25, 2007 3:18 pm
- Location: South East London
- MMOC Member: No
Re: 1968 TRAVELLER RESTORE RESTORATION
Your welding looks like mine, not pretty!
If I decide to do any more I'm going to invest in an automatic mask as they aren't as dear now.
I think you need to turn up the power a bit, and the wire speed down a bit, but I'm sure there is someone here who could give better advice on this.
If I decide to do any more I'm going to invest in an automatic mask as they aren't as dear now.
I think you need to turn up the power a bit, and the wire speed down a bit, but I'm sure there is someone here who could give better advice on this.
"Once you break something you will see how it was put together"
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
Re: 1968 TRAVELLER RESTORE RESTORATION
hi there yea welds are poor in some places thih pics are of the floor as i found itMarkyB wrote:Your welding looks like mine, not pretty!
If I decide to do any more I'm going to invest in an automatic mask as they aren't as dear now.
I think you need to turn up the power a bit, and the wire speed down a bit, but I'm sure there is someone here who could give better advice on this.
and am hoping that my welds can be a few grades higher than those
yes i bought a automatic welding mask for 18 pounds plus 5 pounds postage off ebay
its great and works a treat
well worth it m8
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
Re: 1968 TRAVELLER RESTORE RESTORATION
no problems m8 your traveller looks awesome like the upholstry
superb detail
superb detail
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
Re: 1968 TRAVELLER RESTORE RESTORATION
Please disregard these comments, unable to delete following PM explaining eyesight etc.
Apologies [/quote]
hi looking at your traveller
its awesome m8
the upholstery and the detail is out of this world
if only they could find a way of producing them again
and meet the safety standards
of today the traveller would sell and sell no bother
never mind all those toys they got on the present day cars
basic am sure would sell and keep down the repair costs
Apologies [/quote]
hi looking at your traveller
its awesome m8
the upholstery and the detail is out of this world
if only they could find a way of producing them again
and meet the safety standards
of today the traveller would sell and sell no bother
never mind all those toys they got on the present day cars
basic am sure would sell and keep down the repair costs
Last edited by alexandermclaren on Fri Jan 06, 2012 10:43 pm, edited 1 time in total.
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
-
- Newbie
- Posts: 3
- Joined: Tue Nov 29, 2011 10:07 am
- MMOC Member: No
Re: 1968 TRAVELLER RESTORE RESTORATION
Hi
New to the Forum. Have just bought a 69 Traveller. Looks like I was slightly luckier than you Alexander.
The welding on mine has been completed by someone with a good knowledge of how rust can ruin a decent weld.
I wish you luck on your restoration project, it has given me inspiration to take some photos of mine as I go along.
The timber needs totally replacing on my traveller. I love my woodwork, and would love to make this myself. Does anyone have any idea where I can get a working set of drawings from for the Ash work? I have tried bay, and trawled the net for hours, with no luck.
New to the Forum. Have just bought a 69 Traveller. Looks like I was slightly luckier than you Alexander.
The welding on mine has been completed by someone with a good knowledge of how rust can ruin a decent weld.
I wish you luck on your restoration project, it has given me inspiration to take some photos of mine as I go along.
The timber needs totally replacing on my traveller. I love my woodwork, and would love to make this myself. Does anyone have any idea where I can get a working set of drawings from for the Ash work? I have tried bay, and trawled the net for hours, with no luck.
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes
Re: 1968 TRAVELLER RESTORE RESTORATION
hi
your project sounds interesting and exciting
so the woodwork
if its still there? why dont you dismantle if bit by bit and use it as a template
if you look at some web sites that are selling them you can see an exploded view of all the pieces
and as ash timber is a home grown sourced wood all you need to look out for is that it has been properly seasoned with a low
moisture content prior to you cutting it to shape
all the best and looking forward to you posting some pictures
alex
your project sounds interesting and exciting
so the woodwork
if its still there? why dont you dismantle if bit by bit and use it as a template
if you look at some web sites that are selling them you can see an exploded view of all the pieces
and as ash timber is a home grown sourced wood all you need to look out for is that it has been properly seasoned with a low
moisture content prior to you cutting it to shape
all the best and looking forward to you posting some pictures
alex
-
- Minor Addict
- Posts: 658
- Joined: Mon Nov 07, 2011 7:10 pm
- Location: Sunny Ailsa Craig
- MMOC Member: Yes