Damper Temp Removal...

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Arthurdaily
Minor Addict
Posts: 636
Joined: Tue May 24, 2011 4:25 pm
MMOC Member: No

Damper Temp Removal...

Post by Arthurdaily »

Hi all

I'm respraying my engine bay next week, the engine is alread out and bits of welding done - everything unbolts and screws off easily enough, but what about the suspension dampers ... the big 'box' on each side - can I just unbolt them? Or are they under pressure? Help appreciated! :D
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Damper Temp Removal...

Post by bmcecosse »

Once the load is off the suspension - yes they can be removed - but be sure to keep a bolt or two in the securing plate inside the hollow member in case it falls out of position! I'm not sure it can - but what a bu99er if it did!
ImageImage
Image
chrisryder
Minor Legend
Posts: 2217
Joined: Mon Nov 15, 2010 11:44 pm
Location: West Midlands UK
MMOC Member: No

Re: Damper Temp Removal...

Post by chrisryder »

just knock back the tab washers and unbolt the 4 bolts (per damper). they're a self contained unit, nothing to go wrong. the only issue it they're attached to the suspension too.

so you'll have to put the car on axle stands, put a jack under the suspension lower arm and raise it to 'wind up' the spring, then bend back the lock washer and undo the nut on the pin on the top trunnion. this will allow you to remove the big thick washer, and pull one bush out of the top trunnion. giving you just enough movement to wiggle the top trunnion off the other bush and then off the pin.

with that disconnected, and the damper unbolted off the bulkhead, you can just wiggle the damper round to get the pin end out through the slot in the inner wing.

after all that jiggling of the damper it'll have air bubbles in the oil. so once you bolt back in, before reconnecting the top trunnion, move the arm up and down by hand to pump the oil around and allow all the air to rise to the top. you'll feel it get stiffer as you go.

alternatively, if that sounds too much work... paint around them!
Arthurdaily
Minor Addict
Posts: 636
Joined: Tue May 24, 2011 4:25 pm
MMOC Member: No

Re: Damper Temp Removal...

Post by Arthurdaily »

Thank you!!!
Trickydicky
Minor Legend
Posts: 1565
Joined: Fri Aug 05, 2011 9:53 pm
Location: Leeds, West Yorkshire
MMOC Member: No

Re: Damper Temp Removal...

Post by Trickydicky »

If you are taking off the dampers I would be tempted to replace the oil while they are off, (if you have not already done so)
Richard

Opinions are like people,everyone can be different.
Fingolfin
Minor Legend
Posts: 1312
Joined: Thu Jan 28, 2010 4:14 am
Location: Fulton, Missouri, United States
MMOC Member: No

Re: Damper Temp Removal...

Post by Fingolfin »

alternatively, if that sounds too much work... paint around them!
:lol: :lol: That's exactly what I did![frame]Image[/frame]
The way to a man's heart may be making food, but the way to my heart is buying me car parts!
Come read about my Minor at An American Moggie.

Arthurdaily
Minor Addict
Posts: 636
Joined: Tue May 24, 2011 4:25 pm
MMOC Member: No

Re: Damper Temp Removal...

Post by Arthurdaily »

LOL - it does seem quite a lot of work... would it be possible to unbolt each damper bolt on the bulkhead just a few turns so as to be able to pull it off a few milimetre and then put tape round it, at least I could get a 'creep' of paint underneath it? Far less messing...
Fingolfin
Minor Legend
Posts: 1312
Joined: Thu Jan 28, 2010 4:14 am
Location: Fulton, Missouri, United States
MMOC Member: No

Re: Damper Temp Removal...

Post by Fingolfin »

Seems a possibility. I tried to unbolt my dampers, but one of the bolts just spun, so I gave up before something terrible had a chance to happen. If yours don't spin, it should be fine to do what you suggest.
The way to a man's heart may be making food, but the way to my heart is buying me car parts!
Come read about my Minor at An American Moggie.

Post Reply