Workshop Manual AKD3541 - Missing Page Wanted

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
chrisjenner
Newbie
Posts: 8
Joined: Wed Feb 13, 2002 12:00 am
Location: Bromley, Kent.
MMOC Member: No

Workshop Manual AKD3541 - Missing Page Wanted

Post by chrisjenner »

Would a kind person with a copy of AKD3541 be prepared to scan and e-mail me both sides of page MN6?

Many thanks.

Chris Jenner
chrisjenneruk@yahoo.co.uk
Willie
Minor Legend
Posts: 3204
Joined: Tue Feb 12, 2002 12:00 am
Location: S E London
MMOC Member: No

manual

Post by Willie »

My copy is a different edition but if you describe the pages before
and after your missing one i might be able to help.
Willie
[img]http://i39.photobucket.com/albums/e197/wuzerk/mo9.jpg[/img]
chrisjenner
Newbie
Posts: 8
Joined: Wed Feb 13, 2002 12:00 am
Location: Bromley, Kent.
MMOC Member: No

Post by chrisjenner »

Willie:

Many thanks.

MN6 should concern the Fuse Block and Switches. The preceeding page, which would face MN6 is Plate N5 which depicts the indicator stalk and dashboard switches. The succeeding page which would follow MN6 starts with the sub heading Electrical Equipment - continued

Chris.
Willie
Minor Legend
Posts: 3204
Joined: Tue Feb 12, 2002 12:00 am
Location: S E London
MMOC Member: No

page

Post by Willie »

My edition doesn't show the switches so here are both sides of the
page which shows the fuse block.(via e-mail)
Willie
[img]http://i39.photobucket.com/albums/e197/wuzerk/mo9.jpg[/img]
chrisjenner
Newbie
Posts: 8
Joined: Wed Feb 13, 2002 12:00 am
Location: Bromley, Kent.
MMOC Member: No

Post by chrisjenner »

Willie:

Many thanks for going to this trouble for me - unfortunately the page you've sent is from the Workshop Manual (AKD530H), when the page I need is from the Mechanical Service Parts List (AKD3541).

Thank you, anyway.

Kind regards,

Chris Jenner
Post Reply