speado

[scotthesniper]

Hi guys having trouble with speado cable fitting can't seem to get my big hand in anywhere to release it from the back of the speado its self

[LouiseM]

Have you removed the speedo from the dash? There is a screw each side of the speedo holding it in. Access is via the hole in the side of the glove boxes. Don't undo the screws fully, just a few turns, and you should then be able to pull the speedo out far enough to undo the speedo cable.

[scotthesniper]

cheers for the advice i had a look there were no screws in mine it was just needing a good old lever out.

kind regards
scot

[bmcecosse]

If no screws - it would probably fall out.......

[scotthesniper]

no its jammed in quit tight it has a metal ring around it and it was fairly tight coming out and going in but i will get srews to be safer

cheers
scot