Split screen front window rubber replacement

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
sudburypaul
Minor Friendly
Posts: 88
Joined: Fri Apr 08, 2011 4:32 pm
MMOC Member: No

Split screen front window rubber replacement

Post by sudburypaul »

The rubber seal on the front window of my '56 split screen no longer seals at the two bottom corners, leading to wet knees, shoes, and carpet when it rains. I am going to replace it but is there anything specific I need to know about replacing the split screen rubber or will it be an easier than single screen job..?

Paul
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Split screen front window rubber replacement

Post by mike.perry »

:( :cry: :evil: :( :cry: :evil:
The replacement windscreen rubbers will probably be worse than the old ones unless they have produced a new batch. Read back through the old postings then get depressed
[sig]3580[/sig]
sudburypaul
Minor Friendly
Posts: 88
Joined: Fri Apr 08, 2011 4:32 pm
MMOC Member: No

Re: Split screen front window rubber replacement

Post by sudburypaul »

Hmmnn...may see if I can seal it first, otherwise if I attempt a refit I will enlist my care restorer neighbour (he's a v-dub specialist but I'm sure he can manage a Minor too).

Thanks, Paul
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Split screen front window rubber replacement

Post by mike.perry »

You have been warned!
[sig]3580[/sig]
kennatt
Minor Legend
Posts: 2625
Joined: Fri Feb 02, 2007 9:11 pm
MMOC Member: No

Re: Split screen front window rubber replacement

Post by kennatt »

you have been warned again,look back at the old postings,even pro screen fitters have the shakes when they think about it worst job I every did,unless they have improved the rubbers,you will still need to stick the corners in to prevent leaks.
sudburypaul
Minor Friendly
Posts: 88
Joined: Fri Apr 08, 2011 4:32 pm
MMOC Member: No

Re: Split screen front window rubber replacement

Post by sudburypaul »

Okay, thanks chaps - think I'll go with the try and seal it bodge. This job now goes to the bottom of the list along with 'replace headlining' :o Another of my 'I think I'll leave that for now' judgments. Apart from the effort involved I'd be really grumpy if it still leaked after forking out for it.
DAVIDMCCULLOUGH
Minor Legend
Posts: 3010
Joined: Sun Sep 09, 2007 10:42 pm
Location: Whiteabbey, Co Antrim
MMOC Member: Yes

Re: Split screen front window rubber replacement

Post by DAVIDMCCULLOUGH »

I used 3m windscreen mastic when I refiited my screen between the glass rubber and between the body and rubber. If your windscreen rubber is still soft/flexible enough to lift it at the edges should be fine re-sealing it.


Too many Minors so little time.....
kennatt
Minor Legend
Posts: 2625
Joined: Fri Feb 02, 2007 9:11 pm
MMOC Member: No

Re: Split screen front window rubber replacement

Post by kennatt »

where did you get the mastic from could be a good cure for mine cheers
DAVIDMCCULLOUGH
Minor Legend
Posts: 3010
Joined: Sun Sep 09, 2007 10:42 pm
Location: Whiteabbey, Co Antrim
MMOC Member: Yes

Re: Split screen front window rubber replacement

Post by DAVIDMCCULLOUGH »

I can get it through my local motor factors, but any car paint type shop should be able to supply it, think it is about £20 a tube


Too many Minors so little time.....
ASL642
Minor Maniac
Posts: 5200
Joined: Sat Oct 20, 2007 3:14 pm
Location: Worcestershire
MMOC Member: Yes

Re: Split screen front window rubber replacement

Post by ASL642 »

We've had great success using the black roof & gutter mastik from B&Q. It's sealed my leaking back window on the 2dr. It stays slightly "wet" unlike a lot of sealants, and does the job! :D

Lou Rocke
MMOC 43512
sudburypaul
Minor Friendly
Posts: 88
Joined: Fri Apr 08, 2011 4:32 pm
MMOC Member: No

Re: Split screen front window rubber replacement

Post by sudburypaul »

Great, thanks for the suggestions chaps. Will have a look and see what might work best.

Paul
Post Reply