Indicator Tell tale only works on one side........

Discuss Electrical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
DaisyMayFozz
Minor Fan
Posts: 492
Joined: Tue Jun 02, 2009 7:44 pm
Location: East Yorkshire
MMOC Member: No

Indicator Tell tale only works on one side........

Post by DaisyMayFozz »

Another Indicator problem!

so just before the national, I went to fill up for the trip down and noticed that the indicator tell tale was not working when indicating left. I originally thought that the bulb was blow, but the tell tale was working fine when indicating right. I checked that the indicators where working in the petrol station, and yes they still where, except fast on the passenger side as if a bulb was blown.

so the dilemma is

The tell tale flashes once or twice when indicating left and then stops
the indicators work on the passenger side except they are slightly fast
drivers side work just how it should, tell tale and all.
I have replaced the bulb in the stalk and it still does the same
ALL BULBS WORK!

so is it an earth problem, flasher unit, or switch?

Thanks for your help

mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Indicator Tell tale only works on one side........

Post by mike.perry »

If it is a faulty flasher unit then you should get the same problem on both sides.
I would suggest that you have a faulty earth wire and the indicator bulb is earthing through the side light or the mounting bolts
[sig]3580[/sig]
LouiseM
Moderator
Moderator
Posts: 4417
Joined: Sat Jan 08, 2005 5:11 pm
Location: London
MMOC Member: No

Re: Indicator Tell tale only works on one side........

Post by LouiseM »

Take a look at this thread. Worth checking that everything is correctly earthed but someone had a similar problem and it turned out to be a break in the wire:

http://www.mmoc.org.uk/viewtopic.php?f= ... or+working


Eric - 1971 Traveller
DaisyMayFozz
Minor Fan
Posts: 492
Joined: Tue Jun 02, 2009 7:44 pm
Location: East Yorkshire
MMOC Member: No

Re: Indicator Tell tale only works on one side........

Post by DaisyMayFozz »

thanks for the help guys,
solved it!

decided to test all of the bulbs again, and the rear passenger was faulty ( sometimes working sometimes not) and replaced, viola, everything working again!

Cheers Chris

bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Indicator Tell tale only works on one side........

Post by bmcecosse »

More likely to have been connection between bulb and holder - bulbs either work, or not.......but dirty/corroded connections could be the problem.
ImageImage
Image
DaisyMayFozz
Minor Fan
Posts: 492
Joined: Tue Jun 02, 2009 7:44 pm
Location: East Yorkshire
MMOC Member: No

Re: Indicator Tell tale only works on one side........

Post by DaisyMayFozz »

I was looking at the bulb , and it seems that the filament has blow, and then re soldiered its self back together? i have heard of this happening , that the bulb can blow, but is still hot enough to re connect.

it was very corroded as well,but a little bit of emery paper didn't seem to do anything.
Cheers for your help

bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Indicator Tell tale only works on one side........

Post by bmcecosse »

It can happen - maybe once.....
ImageImage
Image
Post Reply