MM Series service advice - Back to the roads again
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
fussyoldfart
- Minor Fan
- Posts: 231
- Joined: Fri May 02, 2008 10:39 pm
- Location: Welland, (Niagara Region) Ontario, Canada
- MMOC Member: No
Re: MM Series service advice - Back to the roads again
If you search "shock absorbers" on this forum you will find lots of previous references but, in general, a straight 20 weight oil is recommended and, yes, the shock should be full.
Fussyoldfart in Welland Ontario. 
-
mike.perry
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: MM Series service advice - Back to the roads again
Set the distributor at TDC or fastest tickover and adjust by road testing up and down your favourite hill.
Shock absorbers should be OK if they are not losing too much fluid.
Brake wheel cylinders should be checked by removing one brake drum at a time and checking that both cylinders are working (front) when pressing the brake pedal.
Please send me the details of your car for the register
Shock absorbers should be OK if they are not losing too much fluid.
Brake wheel cylinders should be checked by removing one brake drum at a time and checking that both cylinders are working (front) when pressing the brake pedal.
Please send me the details of your car for the register
[sig]3580[/sig]