Can any one help me identify this engine number
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 166
- Joined: Wed Mar 30, 2011 3:14 pm
- MMOC Member: No
Can any one help me identify this engine number
Just preparing my engine for a steam clean and we thought it didn't look right, it was blue and had not got a norris mnor enigne number, the enigne number on it is RKM 1121 E 618 can any one help me to identify it
Re: Can any one help me identify this engine number
It's one of the very rare blue seal engines........
-
- Minor Fan
- Posts: 166
- Joined: Wed Mar 30, 2011 3:14 pm
- MMOC Member: No
Re: Can any one help me identify this engine number
What does that mean because we need to know what we need to buy for it
Re: Can any one help me identify this engine number
It's a recon engine - so we need some other clues or pictures to guide us. Does it for example have '950' cast in the side of the block near the exhaust manifold? Or does it have a little plate down there with '1100' stamped on it? But what exactly do you need to 'buy' for it ? General running spares for Ignition etc will fit both 948 and 1098 engines........ and gasket sets are common - except perhaps for the tappet chest covers.
-
- Minor Fan
- Posts: 166
- Joined: Wed Mar 30, 2011 3:14 pm
- MMOC Member: No
Re: Can any one help me identify this engine number
i will post p[ictures, the engine has had all the unleaded convrsion and a lot of work done on it so we need to no wt to but for it
Re: Can any one help me identify this engine number
and again, BUY WHAT FOR IT???
-
- Minor Fan
- Posts: 166
- Joined: Wed Mar 30, 2011 3:14 pm
- MMOC Member: No
-
- Minor Fan
- Posts: 166
- Joined: Wed Mar 30, 2011 3:14 pm
- MMOC Member: No
Re: Can any one help me identify this engine number
1098 with spin on oil filter conversion.
[sig]8426[/sig]
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
-
- Minor Fan
- Posts: 166
- Joined: Wed Mar 30, 2011 3:14 pm
- MMOC Member: No
Re: Can any one help me identify this engine number
Thanks pal, and what a spin on oil conversion sorry to ask what does that mean?
Re: Can any one help me identify this engine number
It' a 1098 head - and a 1098 backplate but we would need to see the other side of the block to be SURE of it being a 1098 engine. 'Unleaded' is nothing to get excited about......... and as pointed out above it has a Mini style oil filter - you screw on/off the filter cartridge. As others have now also asked - what do you want to 'but'(sic) for it ??
-
- Minor Fan
- Posts: 166
- Joined: Wed Mar 30, 2011 3:14 pm
- MMOC Member: No
Re: Can any one help me identify this engine number
Maybe 5th time is the charm...... what do you want to buy for it!!!!!
-
- Minor Fan
- Posts: 166
- Joined: Wed Mar 30, 2011 3:14 pm
- MMOC Member: No
Re: Can any one help me identify this engine number
well now we no its a 1098 we have most parts for it
Re: Can any one help me identify this engine number
You don't know for sure...... show us a pic of the other side of the block...........
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Can any one help me identify this engine number
So far I can spot the following parts missing, thermostat blanking plug or sensor, dynamo mounting bracket, water pump, heater tap, copper pipe and hoses
What is the small hole in the top of the rocker box?
What is the small hole in the top of the rocker box?
[sig]3580[/sig]
Re: Can any one help me identify this engine number
and a 1098 dipstickbmcecosse wrote:It' a 1098 head - and a 1098 backplate.......
[sig]8426[/sig]
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Re: Can any one help me identify this engine number
Dunno about the small hole in the rocker cover - but it's missing the v essential breather pipe connection......
-
- Minor Friendly
- Posts: 18
- Joined: Thu Jun 24, 2010 9:45 pm
- Location: lincoln
- MMOC Member: No
Re: Can any one help me identify this engine number
Hi my morris has the same identification on i found this on a website;
All engines pre-fixed with 'GSE' or 'RKM' were of UNIPART origin when BL split its parts organisation.
'E' at the end of a part number denotes it is a reconditioned, service unit only (basic engine assembly with no ancillaries).
All engines pre-fixed with 'GSE' or 'RKM' were of UNIPART origin when BL split its parts organisation.
'E' at the end of a part number denotes it is a reconditioned, service unit only (basic engine assembly with no ancillaries).
Re: Can any one help me identify this engine number
He's already been told it's a Blue seal recon engine..........