my oil pressure switch is working ok, ie; the light on the speedo fascia
goes out when starting the engine, problem is, i noticed a little oil
dripping from under the engine, and on further investigation the,
oil is coming from the centre of the switch on the engine block, is
there a quick fix? or is a new switch the best way forward?
Oil Pressure Switch [ engine block ]
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 34
- Joined: Sun Mar 27, 2011 6:02 pm
- MMOC Member: No
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Oil Pressure Switch [ engine block ]
The switch is a no maintenance item. Check that it is screwed in tight otherwise a replacement.
[sig]3580[/sig]
-
- Minor Friendly
- Posts: 34
- Joined: Sun Mar 27, 2011 6:02 pm
- MMOC Member: No
Re: Oil Pressure Switch [ engine block ]
took the switch out to examine the unit,
oil is flowing freely between the electrode,
where, obviously it should not, so a new
one is on order,
oil is flowing freely between the electrode,
where, obviously it should not, so a new
one is on order,
