name that part (part two)

Post by **xpress** » Thu Apr 28, 2011 2:52 pm

here we go again ladies, a few parts, let's see if you can all name them and any comments please.

here we go ...[frame]

[/frame][frame]

[/frame]

Post by **Stig** » Thu Apr 28, 2011 3:24 pm

xpress wrote:here we go again ladies, a few parts, let's see if you can all name them

Erm, gearstick, diff, clutch, pushrods, dynamo bracket, clutch rod, flywheel. Do I win a prize?

xpress wrote:and any comments please.

Yeah, the flywheel's rusty.

Post by **xpress** » Thu Apr 28, 2011 3:27 pm

ooo, you're good you are ..!

Post by **rayofleamington** » Thu Apr 28, 2011 3:48 pm

and a clutch cover, a nut, a dynamo adjuster shaft, and maybe a draught excluder?

Post by **Alex'n'Ane** » Thu Apr 28, 2011 4:22 pm

Cardboard!
Now do you take the picture away and we have to try and remember...

Post by **Neil MG** » Thu Apr 28, 2011 4:57 pm

"battery clamp, cuddly toy, toaster, decanter, tv...did I say cuddly toy....

Oooh! Didn't he do well..."

Post by **chrisryder** » Thu Apr 28, 2011 6:54 pm

cover and plate look like 1098 clutch to me.

diff could be anything, you should see some numbers stamped on the outside edge of the large gear. expect to see 9/38 for a 4.22 diff, or something similar for other diff ratios. you never know you could have a valuable one!

i'd be tempted to say the roll of stuff is wing piping rather than draught excluder, but it's hard to tell.

Post by **Alex'n'Ane** » Thu Apr 28, 2011 7:02 pm

i'd guess boot bonnet rubber seal.

Post by **irmscher** » Thu Apr 28, 2011 8:16 pm

they are defintely thingymajigs and watchucallits do i get a prize

Post by **Alex'n'Ane** » Thu Apr 28, 2011 8:31 pm

And they all need to be fitted with a hammer..

Post by **LouiseM** » Thu Apr 28, 2011 8:56 pm

chrisryder wrote:i'd be tempted to say the roll of stuff is wing piping rather than draught excluder, but it's hard to tell.

Looks like it might be a boot seal

xpress - are you asking because you don't know what the parts are? (If so a workshop manual will help

)

Post by **chrisryder** » Thu Apr 28, 2011 9:05 pm

ok, it could be a bootseal! i've been looking at various computers all day. my eyesight isn't what it used to be

i like these light-hearted competitions. we have a thing like this at a car club christmas meal each year. the organiser brings a bit of car and it gets passed around and we have to work out what car it's from!

Post by **les** » Thu Apr 28, 2011 10:25 pm

I should have seen part 1, maybe that wouldn't have been so difficult!

Post by **LouiseM** » Thu Apr 28, 2011 10:46 pm

Here's part 1 Les. See how you get on: http://www.mmoc.org.uk/viewtopic.php?f=1&t=37620
It's not getting more difficult - the parts are just getting rustier

Post by **irmscher** » Thu Apr 28, 2011 11:05 pm

is the rubber a roof seal for a traveller

Morris Minor Owners Club

name that part (part two)

name that part (part two)

Re: name that part (part two)

Re: name that part (part two)

Re: name that part (part two)

Re: name that part (part two)

Re: name that part (part two)

Re: name that part (part two)

Re: name that part (part two)

Re: name that part (part two)

Re: name that part (part two)

Re: name that part (part two)

Re: name that part (part two)

Re: name that part (part two)

Re: name that part (part two)

Re: name that part (part two)