Does anyone know the dimensions of a 1098 engine? Am interested in the length to see how modern engines compare.
Zetec -50cm long -60cm tall K series -48cm long -60cm tall
http://westfield-world.com/enginespecs_car.html
Engine dimensions
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
Alex'n'Ane
- Minor Legend
- Posts: 1024
- Joined: Fri Dec 18, 2009 5:06 pm
- Location: Nottingham
- MMOC Member: No
Engine dimensions
___Anne___
-
Matt
- Minor Legend
- Posts: 3845
- Joined: Fri Apr 16, 2004 1:30 pm
- Location: Hampshire/Berkshire/Gloucstershire/Herefordshire
- MMOC Member: No
Re: Engine dimensions
its not dissimilar in overall dimensions to the zetec
Serial Morris Minor Owner and Old Vehicle Nutter
-
chrisryder
- Minor Legend
- Posts: 2217
- Joined: Mon Nov 15, 2010 11:44 pm
- Location: West Midlands UK
- MMOC Member: No
Re: Engine dimensions
what measurement do you want? head length? flywheel clutch face to starter dog? i've got a complete engine sat in the garage i'll happily pop the tape measure on it!
-
Alex'n'Ane
- Minor Legend
- Posts: 1024
- Joined: Fri Dec 18, 2009 5:06 pm
- Location: Nottingham
- MMOC Member: No
Re: Engine dimensions
From the front pulley to the flat back face of the block? i guess thats what there measuring.
___Anne___
-
chrisryder
- Minor Legend
- Posts: 2217
- Joined: Mon Nov 15, 2010 11:44 pm
- Location: West Midlands UK
- MMOC Member: No
Re: Engine dimensions
front of pulley to back edge of backplate (where box bolts on) = 435mm
the water pump sits further forward than the front pulley (about 30mm more).
if it is of any use, the width (i measured between the 'ears' that the engine mounts bolt to) is 350mm.
the water pump sits further forward than the front pulley (about 30mm more).
if it is of any use, the width (i measured between the 'ears' that the engine mounts bolt to) is 350mm.