lights

Post by **tomas.geoghegan** » Sun Apr 03, 2011 4:35 pm

Hi Please could you help.
my side lights and head lights have decided not to work.
when switched on And now indicators have decided not to work ether.
i have changed the fuses and cleaned the fuse holders with sand paper.
All the wireing seems to be conected and the earths seam ok
and just to add there is no main beam warning light as well.
All dead as a dodo
Best Regards Fellow moggie man Tom Geoghegan
THANKS

Post by **Neil MG** » Sun Apr 03, 2011 5:02 pm

check the connections to the lights switch, all the lights take their power from there and, given you checked the rest, it sounds like a wire loose. If not there, then check the ignition switch.

Post by **tomas.geoghegan** » Sun Apr 03, 2011 5:40 pm

Hi Thanks will check That tomorrow.
Best Regards
Tom

Post by **bmcecosse** » Sun Apr 03, 2011 10:12 pm

Look to the connections on the voltage regulator......

Post by **mike.perry** » Sun Apr 03, 2011 10:23 pm

The side lights are on a separate in line fuse (1098 only) and the headlights are not fused. Check the feed wire to the light switch, brown/blue. Ignition will not affect side/headlights
Indicators are a separate problem, switch on ignition and wipers to check fuse.
Check green wire to term B on flasher is live, if yes connect green wire to green/brown wire and indicate left or right. Indicator lights should be on but not flash. If so replace flasher unit.
Check brake lights

Post by **tomas.geoghegan** » Mon Apr 04, 2011 6:29 am

THANKS FOR YOUR HELP I WILL KEEP YOU POSTED ON HOW I GET ON
Regards Tom

Post by **tomas.geoghegan** » Mon Apr 04, 2011 4:09 pm

Hi Iv checked the brake lights and they work. and a dirty conection was stoping the indercaters.working.
To check the light switch on dash boad i need to remove it. But i cant get the black nob off .I think there is a pin there?
Any tips Please
Thanks
Best Regards Tom

Post by **Neil MG** » Mon Apr 04, 2011 4:23 pm

Yes, push in the pin in on the underside of the black knob and the knob will then pull off. You can then unscrew the chrome bezel and the switch can be withdrawn from behind!

Post by **tomas.geoghegan** » Mon Apr 04, 2011 5:06 pm

Thank you Very much
Best Regards Tom

Post by **tomas.geoghegan** » Fri Apr 08, 2011 1:34 pm

Thanks for all the help.
just to round things up it was a loose wire on the control box.
fantastic support
Best Regards Tom moggie 948 Geoghegan :

Post by **bmcecosse** » Fri Apr 08, 2011 11:30 pm

Post by **beero** » Sat Apr 09, 2011 12:10 am

bmcecosse wrote:Look to the connections on the voltage regulator......

Well done

Morris Minor Owners Club

lights

lights

Re: lights

Re: lights

Re: lights

Re: lights

Re: lights

Re: lights

Re: lights

Re: lights

Re: lights

Re: lights

Re: lights