stripped the dizzy down and guess what. those little balance weight springs go with a bounce don't they. lost totally. turned the garage upside down and where the little blighter got to is anybodys guess.
does any one have a contact to purchase said springs.
might be a good idea to change em both
Doh
advance weight springs lost
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 72
- Joined: Tue Dec 08, 2009 7:25 pm
- Location: wakefield
- MMOC Member: No
advance weight springs lost
"i'll be in in a bit dear. leave me tea on the table"
-
- Minor Legend
- Posts: 2148
- Joined: Thu Apr 15, 2004 7:29 am
- Location: Oswestry, Shropshire
- MMOC Member: No
Re: advance weight springs lost
Hello Rust bucket,
here is one source :- http://www.distributordoctor.com/distri ... rings.html
Alec
here is one source :- http://www.distributordoctor.com/distri ... rings.html
Alec
-
- Minor Friendly
- Posts: 72
- Joined: Tue Dec 08, 2009 7:25 pm
- Location: wakefield
- MMOC Member: No
Re: advance weight springs lost
wow!!!!!!!!!!
£10.50 +vat + postage
not cheap are they. will have another look around and try and find it. if not i'am going to have to bite the bullit.

and looking at that pic from the link there's lots of £10.50's there
£10.50 +vat + postage
not cheap are they. will have another look around and try and find it. if not i'am going to have to bite the bullit.


and looking at that pic from the link there's lots of £10.50's there
"i'll be in in a bit dear. leave me tea on the table"
-
- Minor Legend
- Posts: 2148
- Joined: Thu Apr 15, 2004 7:29 am
- Location: Oswestry, Shropshire
- MMOC Member: No
Re: advance weight springs lost
Hello Rustbucket.
you will at least get the correct springs for your distributor as long as you specify which engine they are for. They are not all the same, but specified to a specific requirement.
Alec
you will at least get the correct springs for your distributor as long as you specify which engine they are for. They are not all the same, but specified to a specific requirement.
Alec
-
- Minor Friendly
- Posts: 72
- Joined: Tue Dec 08, 2009 7:25 pm
- Location: wakefield
- MMOC Member: No
Re: advance weight springs lost
think it would be best to invest in some new ones in the long run.
"i'll be in in a bit dear. leave me tea on the table"
-
- Minor Legend
- Posts: 2148
- Joined: Thu Apr 15, 2004 7:29 am
- Location: Oswestry, Shropshire
- MMOC Member: No
Re: advance weight springs lost
Hello Rustbucket,
"think it would be best to invest in some new ones in the long run."
I don't understand, these are new?
Alec
"think it would be best to invest in some new ones in the long run."
I don't understand, these are new?
Alec
-
- Minor Friendly
- Posts: 72
- Joined: Tue Dec 08, 2009 7:25 pm
- Location: wakefield
- MMOC Member: No
Re: advance weight springs lost
yes i know these are new.what i meant was now that the dizzy is in bits might as well refurb it with new.
"i'll be in in a bit dear. leave me tea on the table"
Re: advance weight springs lost
May as well buy a complete NEW 45D dizzy from simonbbc or accuspark - absolute bargain price and then everything is NEW..........


