GEAR LEVER SPRING AND DISTRIBUTOR PLATE

[AJFMOTORENGINEERSLTD]

Hi there thank you to all of you who have helped me get bits before.

1950 sidevalve Morris Minor

i now need a gear lever spring (cone type that sits underneath ) the gear lever and a distributor spacer plate that has a single bolt to secure it to the cylinder head

can you help

Adrian j Fell AJF MOTOR ENGINEERS Ltd

[mike.perry]

Gear lever turret spring available from Bryan Gostling, MMOC Spares. Make sure that the rods are in line with the box in neutral when you refit the top plate and gear lever, and don't lose the detent springs and ball bearings in the gearbox
Distributor clamp plate - ask Bryan or put a request on the Series MM Noticeboard
Unlike the A Series box the MM gearbox uses EP90 gear oil
Anything else you require?

[AJFMOTORENGINEERSLTD]

hi am i stupid or is there an easy way of messaging Bryan?

[LouiseM]

Just use his e-mail address as shown in Minor Matters. I don't have a copy to hand at the moment but it will be shown on the club information page near the front of the magazine and also on the club spares page. Or if you go to the Club Spares section in the 'Members Area' on this messageboard there's a link to send him an e-mail.