Battery Tray

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
jaguar68
Minor Fan
Posts: 336
Joined: Mon May 18, 2009 9:10 pm
MMOC Member: No

Battery Tray

Post by jaguar68 »

Hi Guys,

I think I may already know the answer to this one. When cleaning up the battery tray and bulkhead area, for rustproofing and repainting, I've discovered some "Bitumastic" type under seal between the tray bulkhead interface. Is this usual? I'm working on the assumption (dangerous I know) that it shouldn't be there. This "underseal" type material covers the area the horizontal brace of the bulkhead along to the seam of the inner wing/bulkhead area.

What is the best way to proceed with this problem?

Cheers

John
MarkyB
Minor Maniac
Posts: 7845
Joined: Thu Jan 25, 2007 3:18 pm
Location: South East London
MMOC Member: No

Re: Battery Tray

Post by MarkyB »

I would expect to find this type of stuff on the back of the battery box holding some rubber or plastic sheet to cover the big hole back there.
Along to the seam of the inner wing/bulkhead area, not too sure, if there is some there on my car it has been painted over with body colour when it was made.
Maybe an early for of seam sealer?

"Once you break something you will see how it was put together"
taupe
Minor Legend
Posts: 1221
Joined: Sun Oct 26, 2008 3:20 pm
Location: Bucks
MMOC Member: No

Re: Battery Tray

Post by taupe »

These seams were factory brush sealed with hot bitumen. The bitumen was also used elsewhere on the bodyshell and to stick the card hole filling trims to the shell.

As MarkyB says this was applied before painting.
moggydriver62
Minor Fan
Posts: 163
Joined: Wed May 03, 2006 12:00 am
Location: california usa.
MMOC Member: No

Re: Battery Tray

Post by moggydriver62 »

Anybody know what the big hole was for?
MarkyB
Minor Maniac
Posts: 7845
Joined: Thu Jan 25, 2007 3:18 pm
Location: South East London
MMOC Member: No

Re: Battery Tray

Post by MarkyB »

Spit roasting the car.
Slipper dipping is the actual answer, no more rust :) .

http://books.google.co.uk/books?id=TKeC ... ng&f=false

"Once you break something you will see how it was put together"
beero
Minor Legend
Posts: 1207
Joined: Sun Jun 20, 2010 10:43 pm
Location: Chichester
MMOC Member: No

Re: Battery Tray

Post by beero »

Anybody know what the big hole was for?

For letting rats nest in your car when it is in storage??
That's what happened to mine!

jaguar68
Minor Fan
Posts: 336
Joined: Mon May 18, 2009 9:10 pm
MMOC Member: No

Re: Battery Tray

Post by jaguar68 »

Does anyone know if you can paint over modern seam sealer?

Cheers

John
ASL642
Minor Maniac
Posts: 5200
Joined: Sat Oct 20, 2007 3:14 pm
Location: Worcestershire
MMOC Member: Yes

Re: Battery Tray

Post by ASL642 »

If it's the type of sealer than comes in a tin and you paint on, rather than the pump tube type then the answer is yes it can be painted over.

Lou Rocke
MMOC 43512
jaguar68
Minor Fan
Posts: 336
Joined: Mon May 18, 2009 9:10 pm
MMOC Member: No

Re: Battery Tray

Post by jaguar68 »

I've already primed the inner wing and bulkhead on one side, I may just top coat and seam seal after that.

Regards

John
rcharman
Minor Friendly
Posts: 52
Joined: Sun Dec 09, 2007 11:06 am
Location: Helensburgh, Australia, NSW
MMOC Member: No

Re: Battery Tray

Post by rcharman »

Hi from Australia

3M is one company that sells all different types of seam sealers for the automotive industry that I have used for 35 years in the refinishing trade. Just google on the internet for other companies who supply similar products.

Rod
Post Reply