MM Hub spacer

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
sevrien
Minor Friendly
Posts: 55
Joined: Tue Sep 14, 2010 5:34 pm
Location: Tessenderlo Belgium
MMOC Member: No

MM Hub spacer

Post by sevrien »

Hello,

Can somebody tell me if the hub spacer of a later series is the same as an MM?
and can the the rubber spacers of the trunion and swivel be exchanged between MM's and later series?

thank you
DAVIDMCCULLOUGH
Minor Legend
Posts: 3010
Joined: Sun Sep 09, 2007 10:42 pm
Location: Whiteabbey, Co Antrim
MMOC Member: Yes

Re: MM Hub spacer

Post by DAVIDMCCULLOUGH »

I dont know about the hub but the rubbers are the same on both swivels.


Too many Minors so little time.....
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: MM Hub spacer

Post by mike.perry »

The stub axles on the Series MM/early S11 are different to the stub axles on the M1000 and so are the bearings, oil seals and spacers. The M1000 swivel pins can be identified by the circular boss above the steering arm which is absent on the Series MM.
Instructions for adapting M1000 swivel pins to fit Series MMs can be found on the Series MM website under Tech Info.
[sig]3580[/sig]
Post Reply