Small Metal/plastic Clips on Door Cards.

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
custommartin
Minor Fan
Posts: 103
Joined: Sat Jul 27, 2002 5:32 pm
Location: Brentwood, Essex
MMOC Member: No

Small Metal/plastic Clips on Door Cards.

Post by custommartin »

Hi all,

I thought i would look at removing the door cards from the Pick-up, this week-end, ready for cleaning up and re-painting etc.

The drivers side was ok to remove, I just 'pinged' off the metal clips and hey presto.....

However...... at some point the passenger-side clips have been replaced with plastic ones.

I cannot see a way of removing these without cutting the heads off, then of course I can't refit the card!!!

They are like those you get in flat-pack furniture (:lol:). There is a large plastic head with a sort of 'christmas tree' stem. They are easy to fit but impossible to remove!

My question is;
Is it possible to get new metal clips for the LCV panels (not the same as the saloons btw) or does anyone know where to get more of these little clips?????

As usual thanks for the help. :wink:
1971 3.9 litre V8 Pick-Up - At least most of the bodywork is original!
Hibernating - Shhhhhhhhhhhhh!

1966 V8 powered roadster - Now out of hibernation - not long til it's done.................
ColinP
Minor Addict
Posts: 591
Joined: Thu Dec 05, 2002 8:35 am
Location: Berkshire
MMOC Member: No

Post by ColinP »

I dont think those clips are meant to be re-used.
There's a plastic stem pushed through the head so that the tail opens out (like a rawlplug).

I'm sure that there's lots of places to get replacements (not the H word!)

Try Namrick (?)

Colin
dennis
Minor Friendly
Posts: 92
Joined: Sun May 12, 2002 1:00 am
Location: sussex
MMOC Member: No

Post by dennis »

the original metal clips for lcv panels are not available new anymore, you have to try second hand.
and the brown ones are even harder to get.

the plastic ones are rubbish
[img]http://images.andale.com/f2/115/106/3212102/1086722735259_small_8cwt.JPG[/img]
woo
Minor Fan
Posts: 190
Joined: Sun Jul 04, 2004 3:26 pm
Location: S. E. Essex
MMOC Member: No

Post by woo »

Would any of the items shown from this place do the Job?

http://www.vintagecarparts.co.uk/en/lis ... ngs~clips/
Kevin
Moderator
Moderator
Posts: 7592
Joined: Thu Feb 14, 2002 12:00 am
Location: Watford, Hertfordshire.
MMOC Member: No

Post by Kevin »

Looks like either 883c or 702 could be the item required.
Cheers

Kevin
Lovejoy 1968 Smoke Grey Traveller (gone to a new home after13 years)

Herts Branch Member
Moderator MMOC 44706
custommartin
Minor Fan
Posts: 103
Joined: Sat Jul 27, 2002 5:32 pm
Location: Brentwood, Essex
MMOC Member: No

Post by custommartin »

Thanks for all the help, everybody! :D

Unfortunately, those clips on the web-site are the saloon type, the ones that are hidden behind the fabric.

The LCV ones are slightly different, they are a similar shape but have a round head that is visible from the outside .

As Dennis said, they are no longer available, so I will have to use, at least some of, the new 'rubbish' plastic type.

They do hold the panel on tightly though :lol:

Anyone know of any other suppliers???

Apparently East Sussex Minors sell them.

Thanks again.

Cheers

Martin
1971 3.9 litre V8 Pick-Up - At least most of the bodywork is original!
Hibernating - Shhhhhhhhhhhhh!

1966 V8 powered roadster - Now out of hibernation - not long til it's done.................
Post Reply