sills

[mmjosh]

1.what is the part called where the sill rail finishers bolt onto

2.Are these easy to replace[frame][/frame]

[DAVIDMCCULLOUGH]

Outer sill, the 1/4 panel is not the easiest to replace, chances are when you remove the rear wing to do the repair the mounting flange for the back wings will also be rusty......

[mmjosh]

yes the flange at the back is rust so which one would i replace first

[chickenjohn]

Repair the wing mounting flange first. Or at least that is the order I did it on the convertible. Then you can mount the rear wing to check the B pillar repair section is in the right place before fully welding it.

[mmjosh]

good point right so the flange then the 1/4 part now does anyone know what the panel is called where the sill rail finisher bolts onto

[chickenjohn]

That would be "Outer Undersill R/H (2-Door/Convertible)" http://morrisminorspares.co.uk/shop/pro ... 91f8c61114