window stuck

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
DaisyMayFozz
Minor Fan
Posts: 492
Joined: Tue Jun 02, 2009 7:44 pm
Location: East Yorkshire
MMOC Member: No

window stuck

Post by DaisyMayFozz »

Hi again
just after fitting some new door check rods and putting the door back together I have found that the passenger window is jammed. It will not move up or down. there does not seem to be anything in the way of the window or the mechanism. However the window is at a slightly bent angle (there is about 10mm gap at the top left of the frame and no gap at the top right of the frame) could this be the cause?
any suggestions welcome, thanks

bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: window stuck

Post by bmcecosse »

Does seem like it has wedged - is there no way to straighten it up - from inside the door ?
ImageImage
Image
DaisyMayFozz
Minor Fan
Posts: 492
Joined: Tue Jun 02, 2009 7:44 pm
Location: East Yorkshire
MMOC Member: No

Re: window stuck

Post by DaisyMayFozz »

tried to straighten it up from inside the door but it is stuck in that position.

mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: window stuck

Post by mike.perry »

Keep your fingers out of the way inside the door frame, things can drop or get caught in the winder teeth. It HURTS :(
[sig]3580[/sig]
Post Reply