new wheels

[hotrodder13]

well got new tyres on today and they fit with a bigger gap then i thought [frame][/frame][frame][/frame]

just need to finish polishin the front

[GAS]

Sweet,you can't go wrong with slotmags.

[mmjosh]

nice one mate

[hotrodder13]

i know but i need to roll the edge of the wing, i can just get my hand under and they slighly stick out but look AMAZIN

[GAS]

Do you have center caps for them?
What size are your tyres ?

[ratrodmog]

Looking sweet Tom, slots are the way forward . I may have more of a problem with wide wheels than you [frame][/frame]

I am working on some bolt on wide rear wheel arches, see here http://www.mmoc.org.uk/viewtopic.php?f= ... 5&start=30 PM if you're interested

[hotrodder13]

Do you have center caps for them?
What size are your tyres ?

i ordered some but dont seem to be right so i might be able to make fit , and they are 175/65/14 (lower profile) but might go wider next time

seems to go quicker and grip is amazin just got to watch i dont snap a half shaft

front tyres will be 165/70/13

[GAS]

I have 215x70x14 on the back of mine.
Mind you i've had to kick out the wing by about 3 inches(thats 7.5 cm for the kids) [frame][/frame]

[jonathon]

Is that 215's on Minor stud pattern and studs. Might be a tad marginal.

[PSL184]

I agree - Slots look good....
[frame][/frame]

[plastic_orange]

They do

[hotrodder13]

i dont really want widened wings so they do stick out slight but not enought to hurt anyone , fronts should be going on next weekend

[MColes]

I liked them on my car for a while but know I've had enough and have gone back to the original wheels

[GDL]

I love slots - but couldn't find any , so settled for wellers instead .

I liked them on my car for a while but know I've had enough and have gone back to the original wheels

- give us a shout if bored, might just see if i can stretch my budget and buy them

[hotrodder13]

I liked them on my car for a while but know I've had enough and have gone back to the original wheels

- give us a shout if bored, might just see if i can stretch my budget and buy them[/quote]

i have another set for sale now or if you can wait im gona polish and sell (same as mine 13x5.5 for front and 14!x6 for back and no need for widend wings

[hotrodder13]

also how wide are urs plastic i like the way u made a runner board to the wing

[plastic_orange]

8 x13 with 205/60 front and 8 1/2 x 15 with 265/50's rear (4 inch over size rear wings).

Pete

[bmcecosse]

How are you polishing them ? Because my arms are worn out polishing mine by hand! Is there a small ' polishing mop' for this sort of job that can be driven by a leccy drill ???

[hotrodder13]

How are you polishing them ? Because my arms are worn out polishing mine by hand! Is there a small ' polishing mop' for this sort of job that can be driven by a leccy drill ???

there is, its a small reb ball and gets in all the nuc and crannies ill get a pik up

mine were done with sand paper a cloth some mothers and the red ball, the wheels were knackered when i got em

[plastic_orange]

Solvol and elbow grease
I've had the front ones from new though

Pete