
GAS STRUT FOR THE BOOT.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
GAS STRUT FOR THE BOOT.
has anyone fitted these to their boot? if so from which car and what size ? thanks 

-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: GAS STRUT FOR THE BOOT.
I fitted the Birmingham MMC gas strut to the boot of my Series MM. It was easy to fit as the top bolted onto one of the hinge bolts and the bottom bolted on to the hole where the boot stay fits. I found it very useful for a while as it saved messing around with the manual propping boot stay - until the hinge broke! I was not best pleased as it was a good condition early hinge. Consequently I now have one good condition hinge and one with corroded chrome.
Anyone want to buy a boot gas strut????????????
Anyone want to buy a boot gas strut????????????
[sig]3580[/sig]
Re: GAS STRUT FOR THE BOOT.
I found some that fit mine, in place of the ratchet strut, after a walk around a wrecker with a measuring tape. I mounted it where the strut was and it has worked well for the last 4 years. It was off some sort of early Citroen hatchback.[frame]
[/frame]
I did have one on each side but it was way too powerful.
I did have one on each side but it was way too powerful.
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: GAS STRUT FOR THE BOOT.
The Traveller rear door gas struts work well, the doors no longer blow shut in the wind or when the car is pointing downhill.
[sig]3580[/sig]