Carb mounts (bmcecosse)

[RobMoore]

Here are pics of my carb hole and the filter
Carb hole[frame][/frame]
Air filter case[frame][/frame]
I found this in my box of spares.[frame][/frame]

[bmcecosse]

Can't really see - it just looks like the mounting plate for the filter, may have a smaller inlet hole than the carb inlet. You would need to un-do the two screws and remove it - then measure the hole sizes!

[RobMoore]

They do appear to the same size but my sight aint what it was.
when fitted I can feel a slight lip though probably about 1 mil
[frame][/frame][frame][/frame]

btw, is the filter seated in the correct manner?[frame][/frame]

[bmcecosse]

Well - any lip is bad news - so file it out!