1098 piston markings

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
southerly95
Minor Fan
Posts: 376
Joined: Sun Oct 29, 2006 10:52 pm
Location: North Norfolk
MMOC Member: No

1098 piston markings

Post by southerly95 »

Other than the stamp MOWOG the only markings on my pistons is a 2 with an > on top of it on the drivers side of the engine, is this a standard bore please? Thanks, John
[sig]4918[/sig]
Top
PSL184
Minor Legend
Posts: 4978
Joined: Thu Jul 03, 2008 5:49 pm
Location: Nuneaton
MMOC Member: No

Re: 1098 piston markings

Post by PSL184 »

Unless you can see "+10", "+20" etc they should be standard. Pistons were stamped with 1, 2 or 3 when they were made so that they could be matched when the engine was assembled....
[sig]8426[/sig]

Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Top
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: 1098 piston markings

Post by bmcecosse »

It's usually a diamond shape <>. Yes they are standard pistons.
ImageImage
Image
Top
Post Reply

Return to “Mechanical”