hi everyone
does anyone know where i can get hold of ht leads for a side entre distributor cap.
i think the originals has a brass 90 degrees top to them???
i can get hold of the cap just need the leads??
thanks
parts ht leads
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
andrew.searston
- Minor Addict
- Posts: 687
- Joined: Sun Apr 19, 2009 8:55 pm
- Location: kenilworth
- MMOC Member: No
parts ht leads
[sig]9671[/sig]
-
aupickup
- Minor Maniac
- Posts: 6004
- Joined: Tue Jul 20, 2004 11:41 pm
- Location: lanark
- MMOC Member: No
Re: parts ht leads
i may have some sets with copper 90 degree ends
do you want push on or screw on at the dizzy cap
do you want push on or screw on at the dizzy cap
-
andrew.searston
- Minor Addict
- Posts: 687
- Joined: Sun Apr 19, 2009 8:55 pm
- Location: kenilworth
- MMOC Member: No
Re: parts ht leads
what difference does it make???
ive got the cap just need to make up the leads and copper caps.
have u got any new old stock by any chance????
ive got the cap just need to make up the leads and copper caps.
have u got any new old stock by any chance????
[sig]9671[/sig]
-
aupickup
- Minor Maniac
- Posts: 6004
- Joined: Tue Jul 20, 2004 11:41 pm
- Location: lanark
- MMOC Member: No
Re: parts ht leads
yes i do
i will look and see what i have the weekend if thats ok
i will look and see what i have the weekend if thats ok
-
andrew.searston
- Minor Addict
- Posts: 687
- Joined: Sun Apr 19, 2009 8:55 pm
- Location: kenilworth
- MMOC Member: No
Re: parts ht leads
thats fine, no rush
im not 100% sure if ill have them yet (see my dad first)
could u post some pics of them please
and what sort of price.
im not 100% sure if ill have them yet (see my dad first)
could u post some pics of them please
and what sort of price.
[sig]9671[/sig]
-
aupickup
- Minor Maniac
- Posts: 6004
- Joined: Tue Jul 20, 2004 11:41 pm
- Location: lanark
- MMOC Member: No
Re: parts ht leads
just leads £10.00 a set
leads and side entry dizzy £15.00
new old stock
will get photos weekend
i have a photo of some on my van
leads and side entry dizzy £15.00
new old stock
will get photos weekend
i have a photo of some on my van
-
aupickup
- Minor Maniac
- Posts: 6004
- Joined: Tue Jul 20, 2004 11:41 pm
- Location: lanark
- MMOC Member: No
Re: parts ht leads
just leads £10.00 a set
leads and side entry dizzy £15.00
new old stock
will get photos weekend
i have a photo of some on my van[frame]
[/frame]
leads and side entry dizzy £15.00
new old stock
will get photos weekend
i have a photo of some on my van[frame]
Re: parts ht leads
You buy HT cable by the metre (or by the roll in RS Components) - then you need ends to fit the spark plug. Probably best to try a Motor Cycle place - they do good 'waterproof' caps for the plugs.
Re: parts ht leads
The side entry cap does not need any connector on the end of the cable. Inside the cap, each terminal has a small screw. When loosened, the clean cut cable then pushes into the hole in the side of the cap. The terminal screw is then tightened so that it pierces the cable insulation and connects with the conductor. At the other end, you need a connector for the spark plug. Over the years there were various sorts, some borrowed form other equipment. You can look here: http://www.vehicle-wiring-products.eu/V ... minals.php
If you want total originality then fit the plain metal connectors. More practical is the rubber or plastic cap that screws into the HT cable. You could buy a set of standard copper cored leads from any Minor trader and just cut off the later type of connector at the cap end, or make your own leads from components purchased separately.
If you want total originality then fit the plain metal connectors. More practical is the rubber or plastic cap that screws into the HT cable. You could buy a set of standard copper cored leads from any Minor trader and just cut off the later type of connector at the cap end, or make your own leads from components purchased separately.