glovebox bolts

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
FrankM83
Minor Legend
Posts: 1188
Joined: Sat Sep 11, 2004 4:05 pm
Location: Malta
MMOC Member: No

glovebox bolts

Post by FrankM83 »

Hi all what is the correct size bolt to hold the gloveboxes in place please? thanks

Top
aupickup
Minor Maniac
Posts: 6004
Joined: Tue Jul 20, 2004 11:41 pm
Location: lanark
MMOC Member: No

Re: glovebox bolts

Post by aupickup »

thewy are self tapping screws
Top
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: glovebox bolts

Post by mike.perry »

Unless you are refering to the lids.
[sig]3580[/sig]
Top
PSL184
Minor Legend
Posts: 4978
Joined: Thu Jul 03, 2008 5:49 pm
Location: Nuneaton
MMOC Member: No

Re: glovebox bolts

Post by PSL184 »

From memory 7/16" but I'd have to check if UNF or UNC....
[sig]8426[/sig]

Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Top
DAVIDMCCULLOUGH
Minor Legend
Posts: 3010
Joined: Sun Sep 09, 2007 10:42 pm
Location: Whiteabbey, Co Antrim
MMOC Member: Yes

Re: glovebox bolts

Post by DAVIDMCCULLOUGH »

I think its 2ba........


Too many Minors so little time.....
Top
FrankM83
Minor Legend
Posts: 1188
Joined: Sat Sep 11, 2004 4:05 pm
Location: Malta
MMOC Member: No

Re: glovebox bolts

Post by FrankM83 »

sorry yes forgot to mention it was for the lids!

Top
alanworland
Minor Legend
Posts: 1453
Joined: Tue Jan 30, 2007 10:09 pm
Location: Essex
MMOC Member: No

Re: glovebox bolts

Post by alanworland »

Mine are 2Ba
Image
Top
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: glovebox bolts

Post by mike.perry »

Series MM are hex head bolts, 1098 are philips head bolts, all the same thread. 948 glove box lids when fitted were screw fitted hinges. Correct me if I am wrong!
[sig]3580[/sig]
Top
Post Reply

Return to “Bodywork”