tool kit

Post by **andrew.searston** » Thu Dec 17, 2009 8:48 pm

hi everyone
can anyone list the tools and items that make up a complete tool kit for a minor 1000 please????
thanks andrew

Post by **bmcecosse** » Thu Dec 17, 2009 9:08 pm

Been asked and answered many times before. Do a search!

Post by **aupickup** » Fri Dec 18, 2009 10:02 am

teclamite grease gun
3 box spanners
3 spanners
screwdriver

Post by **mike.perry** » Fri Dec 18, 2009 12:26 pm

Jack, Wheelbrace, Starting Handle, Plug Spanner, Grease Gun.
Combined Starting Handle / Wheel Brace on later cars

Post by **aupickup** » Fri Dec 18, 2009 12:28 pm

hub cap remover tool
tommy bar

Post by **Mogwai** » Fri Dec 18, 2009 1:59 pm

A tapping stick for the fuel pump

Post by **mike.perry** » Fri Dec 18, 2009 8:24 pm

hub cap remover tool

On the other end of the wheel brace

Post by **taupe** » Sat Dec 19, 2009 2:00 am

Post by **mike.perry** » Sat Dec 19, 2009 11:38 am

7 is the jack for a Series MM/II, 8 is the jack for the M1000. Both should be for display purposes only. A decent scissor jack sould be used for jacking up the wheels.
What no plug spanner?
I thought that item 3 was part of the car. I have it fitted on the MM but not on the Traveller
What are the items 17-19 to the left of the starting handle/wheel brace?

Post by **aupickup** » Sat Dec 19, 2009 11:43 am

box spanner and spark plug or points gaping tool i think

tool kits were changed over the years as well

my car came with the toolkit supplied and it had a seperate hub cap remover tool

Post by **katy** » Sat Dec 19, 2009 3:59 pm

What IS item #3??

Post by **aupickup** » Sat Dec 19, 2009 4:11 pm

thats the starting handle guide

Post by **PSL184** » Sat Dec 19, 2009 4:11 pm

Looks like a jacking point....?

Post by **aupickup** » Sat Dec 19, 2009 4:13 pm

never seen a jacking point like that

Post by **PSL184** » Sat Dec 19, 2009 4:17 pm

Me neither but I couldn't think of anything else....

Post by **aupickup** » Sat Dec 19, 2009 4:30 pm

ah yes i may stand to be corrcted

i see what u mean now the one that fits to the inner front wing on an early mm maybe

Post by **PSL184** » Sat Dec 19, 2009 4:36 pm

No idea to be honest Dennis - The layout of the picture though does suggest you are correct in assuming its the guide for the starting handle...

Post by **aupickup** » Sun Dec 20, 2009 1:06 pm

http://cgi.ebay.co.uk/1960s-CLASSIC-CAR ... 563827ee1c

Post by **mike.perry** » Sun Dec 20, 2009 3:55 pm

Definately the starting handle guide, probably stops you from putting the handle through the bottom of the radiator!!! As I said, I have one fitted to my MM but not my Traveller.
The MM jacking points are a plate on the rear inner wing behind the axle and an extended plate held on by two bolts at the base of the A post. I would not trust balancing the car on either one.
Still not convinced about 17, 18 & 19

Post by **katy** » Sun Dec 20, 2009 5:24 pm

Looks like another missing piece I'm going to have to source for our car. Might be easier for me to fabricate one.