Wheel bearing noises.

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
ssnjimb
Minor Fan
Posts: 425
Joined: Fri Nov 28, 2008 2:41 pm
Location: Worcestershire
MMOC Member: No

Wheel bearing noises.

Post by ssnjimb »

Hello Folks

The passenger side front wheel bearing sounds like it is grinding when going round left hand corners does that mean its had it.

It have got a feeling its the inner bearing.

Jamie
I own a 1974 MG Midget 1275 in Teal Blue "Midget" is what we call him and he is in very good to excellant condition "midget" is a Chrome bumper/Round Wheel arch model.
aupickup
Minor Maniac
Posts: 6004
Joined: Tue Jul 20, 2004 11:41 pm
Location: lanark
MMOC Member: No

Post by aupickup »

jack that side up and rock the wheel vertically and horizontally you will feel play if the bearing is shot, also rotate the wheel and listen
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Post by mike.perry »

When you take the bearings out spin them on your finger. One may feel sloppy or gritty.
[sig]3580[/sig]
kennatt
Minor Legend
Posts: 2625
Joined: Fri Feb 02, 2007 9:11 pm
MMOC Member: No

Post by kennatt »

normally the noise is the otherway round ie you hear the noise from the left when going round a right hand bend,as the weight of the car goes onto the left hand bearing,and vis versa .its a classic test for bearings,if the noise get less when rounding a bend then its the oposite wheel bearing,front or rear. That is it usually is,but not set in stone
alanworland
Minor Legend
Posts: 1453
Joined: Tue Jan 30, 2007 10:09 pm
Location: Essex
MMOC Member: No

Post by alanworland »

A previous car of mine had terrible wheel bearing noise, I jacked it up many times to find out which one it was but was none the wiser!
It gave up the ghost big time and when I pulled it apart the balls were blue with heat!
Wifes Escort had a bearing packing up - so I did all the tests, more noise with more load when turning corners etc Pulled it all apart, changed bearings (which looked ok) All back together - no difference at all - it was the other side!
Make sure you pick the right side!!! (or the left!!!)
Image
Post Reply