Rewire of 69' minor1000

Discuss Electrical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
techman
Newbie
Posts: 2
Joined: Tue Jun 24, 2008 10:21 pm
Location: Ireland
MMOC Member: No

Rewire of 69' minor1000

Post by techman »

Hi guys, i'v been a member for a while but thankfully so far have not needed your knowledge/advice....but now the time has come...... I'm restoring a 69 minor 1000, i have fitted a new loom and there are a few wires i'm slightly confused bout... i have an issue with the wiper motor but another topic has this sorted i hope.. :) but the problem i have is there are two wires - i cant remember the colors off hand, but the wiring diagram i have for them says they are for the 'flashers'?! they emerge from the loom along with the supply for the coil, one has 12v when ignition is on. i cant find a home for them, have ye any ideas?
thanks in advance :)
Top
dp
Minor Legend
Posts: 1056
Joined: Sun Aug 14, 2005 6:26 pm
Location: Southend
MMOC Member: No

Post by dp »

If you could give the colours (main and tracer) me or someone would be able to look them up for you.
Image
Top
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Post by bmcecosse »

Maybe they connect to the flasher canister - which sits on the bulkhead ? Should be 3 wires though - one for the warning light.
See Barry's excellent diagram at the head of this section. Would be green, green/brown and light green.
ImageImage
Image
Top
LouiseM
Moderator
Moderator
Posts: 4417
Joined: Sat Jan 08, 2005 5:11 pm
Location: London
MMOC Member: No

Post by LouiseM »

See Barry's excellent diagram at the head of this section.
That's the wiring diagram 'sticky' for those who haven't a clue who Barry is :wink:

http://www.morrisminoroc.co.uk/index.ph ... ic&t=28295


Eric - 1971 Traveller
Top
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Post by bmcecosse »

But surely most can find their way to the 'head of this section' ??? :roll:
ImageImage
Image
Top
techman
Newbie
Posts: 2
Joined: Tue Jun 24, 2008 10:21 pm
Location: Ireland
MMOC Member: No

Post by techman »

cheers lads for the reply's..... i had a look at stickys diagram, its not to the flasher can, i have those wires on... unfortunately i'm away during the week with work and i ment to take the colours with me... i suspect they may be for oil pressure and the oil filter.... i dont remember a connection for the filter! is it possible some models dont have that switch? sorry for being so dumb :)
Top
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Post by bmcecosse »

Yes -some don't have the useless filter switch. But ALL have the oil pressure warning switch.
ImageImage
Image
Top
Post Reply

Return to “Electrical”