Brake Pads

Post by **h20_mako** » Mon Sep 07, 2009 11:03 am

Dad did a conversion to front brake disc.

pads are finishing soon and need to get spares.

i'm not sure what pads are these conversion from.

Please advice. Thanks.

Pictures attached.<br>

<br>

Mon Sep 07, 2009 12:16 pm

they look like marina / ital pads to me but not sure about that wire.

Post by **simmitc** » Mon Sep 07, 2009 1:07 pm

Can't really tell without dimensions, but I agree with CMM above. Not seen eany with a wire for a warning light though. You could take them to a spares hop and look through the book, many will have full size drawings to compare.

Post by **h20_mako** » Tue Sep 08, 2009 4:12 pm

haha not to sure why is there a wire for warning light thou.

thanks for your help. i found out its a ital pad due to the fillet bottom corners. as for marina pads, they have sharp corners.

no worries, found out that both marina and ital pads can be used.
but i guess i use ital, just to be on the safe side as i will be getting this from UK and will not want to waste postage cost

Tue Sep 08, 2009 6:49 pm

ital and marina are exactly the same.

Post by **aupickup** » Tue Sep 08, 2009 8:12 pm

the wire is obviously a warning light which shows on the dash for low brake pads

Tue Sep 08, 2009 8:34 pm

you think the ital was that advanced?

Post by **bmcecosse** » Tue Sep 08, 2009 8:35 pm

Not a chance !