Just for fun

Post by **markattard** » Mon Jun 15, 2009 10:12 am

Would you be able to identify each part from left to right?

Hint they are all series II parts

Post by **pfgiz** » Mon Jun 15, 2009 10:22 am

I can't see the image.......

Post by **markattard** » Mon Jun 15, 2009 12:05 pm

Thanks now sorted

Post by **pfgiz** » Mon Jun 15, 2009 5:02 pm

OK, from left to right…

Bonnet Slam Plate
Rear seat hinge
Wire Loom Anchor
Steering Wheel Mount
?? Mount for main-beam switch
Bonnet Release cam-arm
Bonnet Stay
?? Don’t know but will probably kick myself.
Other rear seat hinge
Bonnet catch
Hand brake
The two shiny bits are the connectors for the bonnet release mech

How did I do????

Post by **rob.hardy1** » Mon Jun 15, 2009 6:23 pm

Dont know what most of them are but they make a rubbish shower curtain.

Post by **ani** » Mon Jun 15, 2009 6:25 pm

I thought this was one of those special gadgets you see hanging in old kitchens - add a few pots and pans and would make a nice focal point. I'm sure it would inspire all sorts of conversations whilst around the dinner table

Post by **8009STEVE** » Mon Jun 15, 2009 7:45 pm

Mary asks
Is it a torture chamber?

Or is it for some other usage?

Post by **pfgiz** » Mon Jun 15, 2009 8:00 pm

I like the shower curtain idea, but they would need a decent coat of paint to stop them rusting....

I can see it being the focal on 'Grand Designs'.....

Post by **markattard** » Tue Jun 16, 2009 8:28 am

Wire loom anchor
Mount for main-beam switch
Don’t know but will probably kick myself
The two shiny bits are the connectors for the bonnet release mech

these are incorrect, apart from the shiny bits which are the pins for the bonnet stay, these are parts only seen on mm's and series II

Torture chamber....

... the only torture here is that I long to see everything fixed to the car and up and running!

Post by **ASL642** » Tue Jun 16, 2009 10:43 am

Keep dreaming Mark - you'll get there in the end!

Post by **markattard** » Wed Jun 17, 2009 7:32 am

Hints

One little bit is found in the boot space...

Another bit with two bolts has something to do with a light...

The odd bit is somewhere near a carburettor

Post by **pfgiz** » Wed Jun 17, 2009 10:37 am

so that'll make them....

Boot stay hold up clip
Rear light base
Throttle return spring bracket

???

Post by **markattard** » Wed Jun 17, 2009 11:52 am

only one wrong now....the last one should read : steady bracket for old type air filter, fits to tube air filter and manifold duct and shows slightly in this pic:

http://potteries.mmoc.org.uk/RallyPics/ ... re_106.jpg