Crossmember

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Garym
Minor Friendly
Posts: 35
Joined: Fri Oct 19, 2007 1:22 am
Location: Northumberland
MMOC Member: No

Crossmember

Post by Garym »

I am looking to renew all of the floors,sills,spring hangers and center crossmember on my 61,2 door minor.I take it that I replace the floors and sills first before I weld in the cross member.Is this right ?
Top
PSL184
Minor Legend
Posts: 4978
Joined: Thu Jul 03, 2008 5:49 pm
Location: Nuneaton
MMOC Member: No

Post by PSL184 »

Yes but the floor repairs usually weld to the top of the crossmember so leave that but until the new crossmember is fitted. If the car is very rotten it would be wise to brace the door appertures before cutting the old floors out to retain the correct shape.
[sig]8426[/sig]

Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Top
Post Reply

Return to “Bodywork”