Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see:
Terms of Use
joannebinney
Minor Friendly
Posts: 55 Joined: Thu May 28, 2009 9:30 amLocation: cleckheatonMMOC Member: No
Post
by joannebinney Fri Jun 05, 2009 4:46 pm
ive just bought the new window seals for my quarter lights but what is the piece called that the actual window bit slides into? It's all perished and hard so the glass doesn't slide in properly (doesn't close properly either) , thanks in advance
[sig]9890[/sig]
mike.perry
Series MM Registrar
Posts: 10183 Joined: Sun Jul 24, 2005 11:39 pmLocation: ReadingMMOC Member: No
Post
by mike.perry Fri Jun 05, 2009 5:00 pm
The rubber insert often perishes and pushes the glass out of the quarter light frame. The catches also tend to break off, especially the driver's side. I don't know if the rubber is available separately. It is usually easier to buy a 2nd hand quarterlight
[sig]3580[/sig]
PSL184
Minor Legend
Posts: 4978 Joined: Thu Jul 03, 2008 5:49 pmLocation: NuneatonMMOC Member: No
Post
by PSL184 Fri Jun 05, 2009 5:29 pm
Cut up an old bike inner tube - its only thin rubber....
[sig]8426[/sig]
joannebinney
Minor Friendly
Posts: 55 Joined: Thu May 28, 2009 9:30 amLocation: cleckheatonMMOC Member: No
Post
by joannebinney Fri Jun 05, 2009 5:50 pm
lol thanks i'll try that , now where are the kids bikes!!
[sig]9890[/sig]
alanworland
Minor Legend
Posts: 1453 Joined: Tue Jan 30, 2007 10:09 pmLocation: EssexMMOC Member: No
Post
by alanworland Fri Jun 05, 2009 5:51 pm
Set it in nuetral cure black silicone rubber. This is how I stuck my drivers door window - worked a treat!
PSL184
Minor Legend
Posts: 4978 Joined: Thu Jul 03, 2008 5:49 pmLocation: NuneatonMMOC Member: No
Post
by PSL184 Fri Jun 05, 2009 5:52 pm
Old inner tubes are always worth keeping for all sorts of car related jobs ;-)
[sig]8426[/sig]
bmcecosse
Minor Maniac
Posts: 46561 Joined: Wed Feb 16, 2005 11:24 pmLocation: ML9MMOC Member: No
Post
by bmcecosse Fri Jun 05, 2009 7:42 pm
hotrodder13
Minor Legend
Posts: 1001 Joined: Sun Mar 22, 2009 5:42 pmLocation: PrestonMMOC Member: No
Post
by hotrodder13 Fri Jun 05, 2009 7:43 pm
that is the bit that goes around the quater light. the bit i put on goes around the glass then into the metal quaterlight
freshly painted 1275cc anda very loud big bore exhaust
joannebinney
Minor Friendly
Posts: 55 Joined: Thu May 28, 2009 9:30 amLocation: cleckheatonMMOC Member: No
Post
by joannebinney Fri Jun 05, 2009 8:26 pm
hotrodder13 wrote: that is the bit that goes around the quater light. the bit i put on goes around the glass then into the metal quaterlight
Thats the exact bit i need !! Thanks very much Joanne
[sig]9890[/sig]
hotrodder13
Minor Legend
Posts: 1001 Joined: Sun Mar 22, 2009 5:42 pmLocation: PrestonMMOC Member: No
Post
by hotrodder13 Fri Jun 05, 2009 9:01 pm
no problem. ive baught all new seals for my door tops cause i baught stainless steel ones for my 2door and every rubber had perished
freshly painted 1275cc anda very loud big bore exhaust
joannebinney
Minor Friendly
Posts: 55 Joined: Thu May 28, 2009 9:30 amLocation: cleckheatonMMOC Member: No
Post
by joannebinney Fri Jun 05, 2009 10:31 pm
Thanks for all the reply's , iv'e just ordered them , special thanks to hotrodder13 , i'd never have found them without you at last i'll be able to close the things!!
[sig]9890[/sig]
