Sill finishers

Post by **FrankM83** » Sat May 16, 2009 5:31 pm

HI all bought a set of 2dr S/S sill finishers for my van, obviously these are longer and need to be cut up, whic part do I need to cut? as these go from wider to narrower Thanks

Post by **aupickup** » Sat May 16, 2009 5:39 pm

its wide at the front and narrow at the back so i would say cut the back off

Post by **bmcecosse** » Sat May 16, 2009 8:24 pm

Should have bought 4 door - fronts only!

Post by **FrankM83** » Sat May 16, 2009 8:30 pm

they don't come in that size :S only kick plates but sill finishers are either 2dr saloon and traveller or 4dr saloons unless I missed them

Post by **aupickup** » Sat May 16, 2009 8:31 pm

the front door 4 door cill finishers are the same as the van or pick up

Post by **FrankM83** » Sat May 16, 2009 8:34 pm

aren't 4dr sill finishers complete front to back?

Post by **bmcecosse** » Sat May 16, 2009 8:34 pm

Ahh right - I see 'sill finishers' - not the kick plates then !

Post by **aupickup** » Sat May 16, 2009 8:52 pm

Yes frank they are, had my lcv hat on for a moment there

Post by **LouiseM** » Sat May 16, 2009 8:53 pm

:

Ahh right - I see 'sill finishers' - not the kick plates then !

I think the thread title was the give away

Post by **bmcecosse** » Sat May 16, 2009 9:01 pm

Yes indeed - but I am easily confused these days ! Specially after a glass or two!

Post by **markattard** » Sun May 17, 2009 9:00 am

I had mine cut from both sides few millimiters at a time. I think it does not make any difference actually, the most important thing is to respect the gaps to the mudguard and the door edge and b post.

Frank I have yr wheelspin DVD... still!!