wiring in a Fiat twin

[callyspoy]

hi folks, nearly tehre with the Fiat twin project, looks rather sexy in the engine if i do say so myself! sacrilege i know!
but...my problem is wiring it in.
for starters, the starter! i have the pull type switch, which obviously links to the solonoid, but the fiat starter has a solonoid attached to it. so...what do i do here??
The other thing is the alternator, i already had an alternator in the car, so polarity etc isn't a problem, just knowing what goes where!
any other help with other wiring bits would be greatly appreciated! like...the electronic sender on the carb? what's that all about??
cheers in advance,
callum

[bmcecosse]

Just use your pull-start (which is not a 'solenoid') as a switch to send current to the solenoid on the new starter. Obviously - it will need the main battery feed connecting to it's main terminal - and your pull start will simply take a small ignition fed supply down to the solenoid on the starter. Alternator should just wire up as before - unless it is strange foreign item with more than two terminals ?