The insurance co have now payed me off & i got on with repairing it a few weeks ago. Luckily Ive been allowed to do it at on the ramp at work on Saturday mornings


All the damage was quite high up so the chassis legs were untouched its just bent the flitch, inner wing & the corner of the tie plate where the bumper iron mounts<br>
cut out flitch extension & straightened out the inner wing<br>
This is as far as Ive got at the moment. The intention is to bolt the panels on roughly with the minimum bolts so it can be motd & driven to the painters & easily dismantled again when there for spraying