Chassis number ??

Discuss other problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
dennis
Minor Friendly
Posts: 92
Joined: Sun May 12, 2002 1:00 am
Location: sussex
MMOC Member: No

Post by dennis »

you will have no problems with that at all, a lot of moggies are missing taht part anyway.
you could get another chassis plate as well.
Cam
Moderator
Moderator
Posts: 5109
Joined: Mon May 20, 2002 1:00 am
Location: Stoke-on-Trent, Staffordshire, UK
MMOC Member: No

Post by Cam »

They have never checked my chassis number at the MOT, although I believe that they have checked the VIN plate.
Peetee
Minor Legend
Posts: 3428
Joined: Fri Nov 22, 2002 9:20 am
Location: Southampton
MMOC Member: No

Post by Peetee »

Both My mogs have the last part of the chassis number stamped on the bulkhead panel below and to the right of the fusebox.
HTH
Older and more confused than I could ever imagine possible.
57traveller
Minor Addict
Posts: 804
Joined: Fri Apr 16, 2004 8:58 am
MMOC Member: No

Post by 57traveller »

Chassis plates can be purchased from most Minor parts specialists supplied blank and need stamping/engraving. There are different types depending on age of car.

Last time my saloon was MOT'd the tester checked the chassis plate against the number on the old MOT cert. That's the first time I've noticed it being checked.
Kevin
Moderator
Moderator
Posts: 7592
Joined: Thu Feb 14, 2002 12:00 am
Location: Watford, Hertfordshire.
MMOC Member: No

Post by Kevin »

I have just got a new vin plate part DEC 202 late type £3:75 + vat for the bulkhead from Bull Motif 01386 831755 / 831716
The earlier square one is DEC 203 £4:25 + vat and the chassis no only plate DEC 204 is £2:25 + vat
Mine is also stamped in the bulkhead where Pete mentioned.
Cheers

Kevin
Lovejoy 1968 Smoke Grey Traveller (gone to a new home after13 years)

Herts Branch Member
Moderator MMOC 44706
57traveller
Minor Addict
Posts: 804
Joined: Fri Apr 16, 2004 8:58 am
MMOC Member: No

Post by 57traveller »

My local dog identity disc supplier/key cutter engraved both my new chassis plates and made a superb job of them. Fortunately I knew he was reliable but I'm sure they're not all the same standard.
Kevin
Moderator
Moderator
Posts: 7592
Joined: Thu Feb 14, 2002 12:00 am
Location: Watford, Hertfordshire.
MMOC Member: No

Post by Kevin »

Fortunately I knew he was reliable but I'm sure they're not all the same standard.
The original ones were all done by hand and eye thats why the letters and numbers are not at all even on the original plates, have a look next time you are at a Rally.
Cheers

Kevin
Lovejoy 1968 Smoke Grey Traveller (gone to a new home after13 years)

Herts Branch Member
Moderator MMOC 44706
Post Reply