fitting hubcap "prongs"

Post by **tortron** » Sat Oct 18, 2008 5:47 am

hi all,
I am fitting some early 4 stud ford falcon rims to my morrie (SeriesMM)
I am wanting to retain the original hubcaps, however the falcon rims have the 3 bumps style of mounts and these are too large to fit the hubcaps over.

I have heard it mentioned that you can remove the original 3 prongs and install them on other rims. would that involve cutting and welding them on?
are there any other options or suggestions?

Post by **mike.perry** » Sat Oct 18, 2008 10:01 am

Will M1000 hubcaps fit?
I've done things the other way around - fitted Series MM hubcaps to the wide wheels on my Traveller.

Post by **twincamman** » Sat Oct 18, 2008 1:51 pm

Series MM caps are 8.5" diameter, 1000 caps are 9" diameter. You cab get the later one in a plain design like the MM ones, they were used on Austin badged LCVs. Try a couple of the specialists over here.

Post by **bigginger** » Sat Oct 18, 2008 5:16 pm

They were used om ALL LCVs