Putting the gearbox back on the engine

[youngun]

Hmm, correct torque setting would be nicer.

Good, thought i might have been missing one!

[bmcecosse]

No need to get excited about torque on these screws and bolts- just 'snug' them up! I used to just put half of them in - and only the top bolt on the starter. Made for faster engine changes !

[bigginger]

And increased the need for them too, I'd imagine... ;)
a

[bmcecosse]

Not at all - never loosened off in service. It was the thrashing the poor wee 948 got that ensured regular changes were required. Two broken cranks - until I fitted a crankshaft damper from a Morris 1100.