Theres a few areas that are a bit vague in my memory. Does any one have details (pics and/or descriptions) of any of the following. Ill probably post up more as I remember them.
1. Kick panels (at either end of the parcel shelf the vertical trimmed pannel)
2. The end of the parcel shelf, incl mountings. (where the end of the strengthening bar joins to the shell)
3. The trimming on the B pillars. Sorry about this but i need them top to bottom (with seat belts if possible)
4. The parcel shelf (on a 4 door saloon there is a gap between the rear seat backrest and the back window, I could put a window box in there but could be messy
)5. The rear arch trim pannels (all I have for reference is 2 chrome strips that presumably are the edging but the only other thing I remember is there was fabric on there and in one of the restoration books shows it being pulled off with molies)
With any descriptions please give plenty of detail as I might make some of these parts from scratch and could use as much advise as possible.
Mona is a 4 Door 1963 saloon in the "slightly bluer-than-smoke-grey" color
p.s. Does anyone have dimentions, or templates for the boot floor?
