stupid question number 3000078000024

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
wibble_puppy
Minor Legend
Posts: 2031
Joined: Tue Sep 07, 2004 6:09 pm
Location: Room 7609
MMOC Member: No

stupid question number 3000078000024

Post by wibble_puppy »

hi guys,

how do you fit the oblong pad which goes on the clutch pedal as a draught seal? :o

This is the part I'm on about.

As far as I can make out, it sits on an oblong metal bracket at the bottom of the clutch pedal. So to fit it, it has to slip over either the pedal itself or the bottom of the pedal and the oblong bracket. Neither is gonna fit through that leedle slit in the centre of the pad.

Any ideas?

wibble (faffing cos it's raining) 8)
Top
alex_holden
Minor Legend
Posts: 3798
Joined: Tue Jul 25, 2006 9:46 am
Location: Burnley
MMOC Member: No

Post by alex_holden »

I think it just stretches over the pedal, after temporarily removing the rubber cover.
ImageImage
Alex Holden - http://www.alexholden.net/
If it doesn't work, you're not hitting it with a big enough hammer.
Top
wibble_puppy
Minor Legend
Posts: 2031
Joined: Tue Sep 07, 2004 6:09 pm
Location: Room 7609
MMOC Member: No

Post by wibble_puppy »

cheers, alex :)
Top
NZJLY
Minor Fan
Posts: 220
Joined: Fri Apr 22, 2005 1:55 am
Location: Hamilton, New Zealand
MMOC Member: No

Post by NZJLY »

I thought that one was question 3000078000022
Must have missed one or two :wink: :wink: :wink:

I am impressed that you are putting so much effort, on mine the holes down the bottom let out the water that comes in through the top holes :D :D :o

John
Top
Post Reply

Return to “Mechanical”