headlamp

Post by **kessey** » Fri Feb 29, 2008 4:03 pm

can some one please show me how to put the head lamp back together.

send me a digram or something

if anyone lives local im in redditch

thanks louis

Post by **Matt** » Fri Feb 29, 2008 8:59 pm

The headlamp itself is a sealed unit... unless you have a halogen with a seperate bulb.

Do you mean how to put the lamp assembly back in to the car?

Post by **kessey** » Fri Feb 29, 2008 9:05 pm

yeh thats what i mean actually assemblingit back together. i looked in my books and theres no diagram

Post by **moggiemadman** » Sat Mar 01, 2008 9:29 pm

Hi there,Its kinda simple you have 2 set screws one each side that you losen and tighten in,And then the ring goes over the top and you put a screw in the bottom.If you pm me a landline telephone number ill walk you through it.

Cheers
John

Post by **bigginger** » Sat Mar 01, 2008 9:31 pm

Or 3, depending on the type - and then there's the springs and so on as well.
a

Post by **moggiemadman** » Sat Mar 01, 2008 9:33 pm

Oh yeah,Dont forget the spring it attaches on the back of the headlight and goes to the wing,I forgot to put my spring in and then i was using a hammer under the car and my headlight droped out

.

Cheers
John

Post by **bigginger** » Sat Mar 01, 2008 9:41 pm

And the ones under the screws - those are the ones I was getting at
a