getting out the *&?**! spigot bearing bush

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Post by bmcecosse »

No - will be fine!
ImageImage
Image
Top
RogerRust
Minor Legend
Posts: 2437
Joined: Mon Oct 24, 2005 7:10 pm
Location: North Bedfordshire,
MMOC Member: No

Post by RogerRust »

Did you get it out?
Image

This message board is like a family - you can't choose the other members!! But remember engine oil is thicker than water.
Top
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Post by bmcecosse »

See the other post - it's on the way back in now!
ImageImage
Image
Top
Kevin
Moderator
Moderator
Posts: 7592
Joined: Thu Feb 14, 2002 12:00 am
Location: Watford, Hertfordshire.
MMOC Member: No

Post by Kevin »

These bushes rarely wear - so as earlier - seriously consider just leaving it be !
They are often worn with 30 -40 years wear and tear and when all said and done make the input shaft run nice and even reducing strain on the gearbox and its only a couple of quid to replace and the last one I did was badly worn on 2 opposing positions.
Cheers

Kevin
Lovejoy 1968 Smoke Grey Traveller (gone to a new home after13 years)

Herts Branch Member
Moderator MMOC 44706
Top
wibble_puppy
Minor Legend
Posts: 2031
Joined: Tue Sep 07, 2004 6:09 pm
Location: Room 7609
MMOC Member: No

Post by wibble_puppy »

judging from the pieces I got out of the hole, mine was pretty worn :)
Top
Post Reply

Return to “Mechanical”