Patsy won't start

Post by **jackkelleher** » Wed Jun 27, 2007 2:47 am

Or cheat like I do mark the front lead with 1 stripe of tippex, the 2nd with 2 and so on!

I found tippex has a tendency to disappear and chip off... Cable ties work really well! One on one, two on two and so on... You just have to be careful to cut them so they're not sharp.

Post by **bmcecosse** » Wed Jun 27, 2007 8:33 am

You only need one tiny cable tie - on #1 plug. The others then follow in sequence.

Post by **jackkelleher** » Wed Jun 27, 2007 4:49 pm

'Tis true... Funny the things you don't think of!

Post by **Packedup** » Wed Jun 27, 2007 5:14 pm

The Midget has 2 grey leads and 2 red. The Red are on 1 and 3, the grey on 2 and 4.

Makes it quite easy to stick them back on without too much brain power

Post by **bigginger** » Wed Jun 27, 2007 5:17 pm

jackkelleher wrote:'Tis true... Funny the things you don't think of!

A ring of insulation tape negates any problems with sharp bits

Post by **jackkelleher** » Wed Jun 27, 2007 5:18 pm

There we are, there'll always be a better way! I rest my case- Funny the things...

Post by **Roni** » Wed Jun 27, 2007 11:19 pm

One advantage to the cable tie method is that you can feel which is which in the dark.

Post by **jackkelleher** » Thu Jun 28, 2007 12:41 am

There we are, I knew I had a justification! Work in the dark... Frequently how I have to work on mine, actually...

Post by **bmcecosse** » Thu Jun 28, 2007 7:35 am

And tape will fall off on a dark and windy night!

Post by **bigginger** » Thu Jun 28, 2007 12:55 pm

It doesn't
a

Post by **Kevin** » Thu Jun 28, 2007 3:48 pm

will fall off on a dark and windy night!

too much IRN BRU from the sounds of it