right the outer undersill piece is already in.
i now have the box section,inner sill and the 2 floor edge sections to put in.
which is the best way to go about this.
i've figured out what goes where but i don't want to weld a piece in only to have to cut it out again.
one thing i haven't cut out the whole piece because
a around the rear seat (4 door) looks well complicated to remove
b its in perfectly good condition there so y remove it so i'll cut the new panel to match not a problem
as far as i can see i will do the floor edge panels add them to the outer undersill and then the box section then th inner sill
unless someone tells me otherwise.
lets just hope it stops raining tom so i can get out there if not i'll be getting my gazebo out i reckon
