The drivers side quarterlight on my 1969 traveller has never fitted quite right. It doesn’t leak, but the whole quarterlight inc glass & metal frame sites in the window frame tilted slightly backward. This results in an uneven gap where the window meets the vertical rubber strip, with the top of the quarterlight being too close to seat against the rubber properly.
Anyone know if there is any adjustment in the quarterlight or window frame setup? I’ve had the whole quarterlight out & there doesn’t seem to be any adjustment possible unless I’ve missed it. The door and frame do not appear to be distorted, not obviously anyway, apart from the usual small crack under the centre window vertical. Cheers, Neil.
