clicktappet adjuster

Post by **jtd.75** » Fri Oct 27, 2006 2:38 pm

Hi all, has anyone used a tappet adjuster and if so are they any good and does anyone have one for sale or one that they could lend me (I will of course pay for the postage). And how simple are they to use.
Jimmy

Post by **Kevin** » Fri Oct 27, 2006 3:20 pm

YES, YES, NO, YES, VERY.
Hi Jimmy 1st thing I need to do is locate it, they are quite good when you have worn rockers because when the rockers get worn the feeler guage does not give an accurate reading unless you trim them down to a much narrower size.
With the tappet adjuster you close the rocker down using the large large adjuster to give no clearance and then undo it the relevant number of clicks to suit the clearance and this gives an accurate setting.
I assume this is what you are thinking of
http://cgi.ebay.co.uk/Clikadjust-Tappet ... dZViewItem
Mine is an earlier version made in the time of our Moggies.

Post by **jtd.75** » Fri Oct 27, 2006 4:05 pm

Cheers Kev, yes thats the type

Post by **RussLCV** » Sun Nov 12, 2006 6:07 pm

I have some instructions in PDF if you want them

Post by **jtd.75** » Mon Nov 13, 2006 6:02 pm

yes please I have sent you a PM
Jimmy

Post by **RussLCV** » Mon Nov 13, 2006 7:02 pm

Sorted PDF posted

Post by **RussLCV** » Tue Nov 14, 2006 8:00 pm

2 PDFs sent to the e-mail address that I was sent an e-mail from

jtd.25@btinternet.com

Post by **jtd.75** » Tue Nov 14, 2006 11:16 pm

Hi Russell I am having trouble with emails to that address so I have changed it. I have sent you a pm with my new address on.
Jimmy

Post by **RussLCV** » Wed Nov 15, 2006 3:46 pm

So why send e-mail using that address!!

Just e-mail me and I will respond as I have already sent 2!

Post by **Leyland** » Thu Nov 16, 2006 12:21 am

Hi Russell

I have sent you a pm

regards

Ty

Post by **Leyland** » Thu Nov 16, 2006 12:22 am

Hi Russell

I have sent you a pm

regards

Ty

Post by **jtd.75** » Thu Nov 16, 2006 8:29 pm

Hi Russell I was not aware that it was still showing as jtd.25 as I have (thought) i had changed it and sent you a pm with the correct address. I was agetting a lot of spam mail after my address was shown on various sites. hence I have not displayed the new one on here.
Jimmy

Post by **RussLCV** » Thu Nov 16, 2006 8:31 pm

So please e-mail me direct and I will respond for the third time to the address that the e-mail comes from.

Russ@MinorLCVreg.co.uk

Ty yours has been sent

Anyone else?

Post by **jtd.75** » Thu Nov 16, 2006 8:33 pm

Hi russell pm on its way to you as I type

Post by **RussLCV** » Thu Nov 16, 2006 8:36 pm

PLEASE E-MAIL DIRECTLY jtd.75 TO ADDRESS AS ABOVE NOT PM, thats where the problem lies

Post by **jtd.75** » Thu Nov 16, 2006 8:36 pm

Hi russell pm on its way to you as I type

Post by **RussLCV** » Thu Nov 16, 2006 8:38 pm

Sent as requested jtd.75

Post by **jtd.75** » Thu Nov 16, 2006 8:38 pm

Hi Russell did you get the email
Jimmy

Post by **RussLCV** » Thu Nov 16, 2006 8:39 pm

Yes sent as above (3rd time) I trust you have it?

Post by **jtd.75** » Thu Nov 16, 2006 8:45 pm

Thanks Russell success at last, next time I am down at my daughters ( Thornhill Cardiff) pehaps I could buy you a pint.
Jimmy

Morris Minor Owners Club

clicktappet adjuster

clicktappet adjuster

pdf file for tappet adjust

address

email

pdf