rear wings

Post by **coogee** » Thu Oct 05, 2006 3:20 pm

Hi how do morris traveller rear wings fit on?

Thanks Phil

Post by **chickenjohn** » Thu Oct 05, 2006 3:51 pm

They screw into the wooden wheelarches with hex screws. about 10 of them.

Post by **coogee** » Thu Oct 05, 2006 4:03 pm

ok thanks.

I fort they needed to be welded

. Makes it a lot cheaper

Post by **chickenjohn** » Thu Oct 05, 2006 4:26 pm

None of the exterior panels on the Minor are welded on- all bolt on. you do mean outer rear wings and not inner?

I would use new fixings

they are cheap from parts suppliers or Screwfix, or the like.

Post by **coogee** » Thu Oct 05, 2006 6:07 pm

yes outer wings

Post by **flying** » Mon Oct 09, 2006 9:25 pm

lol i wish the guy we got the moggy knew they were surpose so be bolted not welded

Post by **coogee** » Mon Oct 09, 2006 9:35 pm

no I did not weld them.

One of the rear wing looked a bit dodgy on the car so i fort i would ask how they fit on.g

Post by **flying** » Mon Oct 09, 2006 9:38 pm

i wernt saying you welded them on....

i had the same problem recently...where i had to get the angle grinder to them

Post by **coogee** » Mon Oct 09, 2006 9:44 pm

ooops read wrong!!

flying wrote:where i had to get the angle grinder to them

o no. that must of been hard work

Post by **flying** » Mon Oct 09, 2006 9:56 pm

not compared to the amount of rust i found under the wings...

.......

but all not is lost........all getting fixed