temperature sender

Post by **sidsmith** » Sun Sep 10, 2006 5:10 pm

Hi I was going through the threads about temp' senders and came across yours. it's well explained but can you tell me if the wiring you have described is for pos' earth or neg' earth as mines is pos' earth. cheers ....Mungo

Post by **8009STEVE** » Sun Sep 10, 2006 7:28 pm

It does not matter which. The feed comes from live to the gauge, through the gauge to the temp sender, through the sender to earth

Post by **sidsmith** » Mon Sep 11, 2006 10:29 am

hi steve, when you say through the sender unit to earth, I take it that the sender unit body to the engine block is the earth connection.
cheers sid

Post by **8009STEVE** » Fri Sep 15, 2006 4:51 pm

Yep that is the earth. Have a look at the technical tips section. There is a wiring diagram there.